Channel - Samsung BD-DT7800 User Manual

Channel

You can configure your TV channels with features
such as country and auto tune.
Antenna
Selects an appropriate type of antenna for digital
broadcasts.
Before your product can begin memorizing the
available channels, you must specify the type
of signal source that is connected to the this
product.
• Air : Select Air for receiving digital broadcasts.
• Cable : Select Cable for receiving digital
broadcasts.
Country
Select this to change the country.
Enter the desired 4-digit password using the
number buttons.
1. Press the ►▲▼ buttons to select the desired
country, then press the ENTER button.
2. Press the RETURN button.
NOTE
✎
` Enter the desired 4-digit password using the number
buttons.
* Default password is set to 0000.
Auto Tuning
Scans for all channels with active broadcast
stations and stores them.
Scans for a channel automatically and stores in
the product.
Automatically allocated programme numbers may
not correspond to actual or desired programme
numbers.
If a channel is locked using the Child Lock
function, the PIN input window appears.
• Air : Press the ▼ button to select the Search,
then press the ENTER button.
• Cable : Press the ▼ button to select the Next,
then press the ENTER button.
Set the Search Mode option, then press the ▼
button to select the Search button.
- Search Mode (Full / Network / Quick) : Scans
for all channels with active broadcast stations
and stores them in the product.
NOTE
✎
` If you select Quick, you can set up the Network,
Network ID, Frequency, Modulation and Symbol
Rate manually by pressing the button on the remote
control.
- Network (Auto / Manual) : Selects the Network ID
setting mode either Auto or Manual.
- Network ID : When Network is Manual, you can
set up Network ID using the numeric buttons.
- Frequency : Displays the frequency for the
channel. (differs in each country)
- Modulation : Displays available modulation
values.
- Symbol Rate : Displays available symbol rates.
Manual Tuning
Scans for a channel manually and stores in the
product.
- When scanning has finished, channels are
updated in the channel list.
NOTE
✎
` When selecting Antenna  Air : Channel, Frequency,
Bandwidth.
When selecting Antenna  Cable : Frequency,
Modulation, Symbol Rate
Cable Search Option
Sets additional search options such as the
frequency and symbol rate for a cable network
search.
- Start Frequency/Stop Frequency : Set the start
or stop frequency (differs in each country).
- Symbol Rate : Displays available symbol rates.
- Modulation : Displays available modulation
values.
Transfer Channel List
This function can import or export the channel
map. You should connect a USB storage to use
this function. Enter your 4 digit PIN number when
the PIN input screen appears.
• Import from USB : Import channel list from USB.
• Export to USB : Export channel list to USB.
This function is available when USB is
connected.
37
English