Related Manuals for BRIO CLCTPOU620UVF2
Summary of Contents for BRIO CLCTPOU620UVF2
- Page 1 WATER DISPENSER MODEL NO. CLCTPOU620UVF2 Thank you for purchasing a Brio water cooler ® Please read and understand this manual before operating your water dispenser Retain this manual for future use...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 INTENDED USE . -
Page 3: Safety Information
SAFETY INFORMATION WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing and operating the dispenser . WARNING: This product dispenses water at very high temperatures . Failure to use properly can cause personal injury . -
Page 4: Intended Use
INTENDED USE This appliance is intended to be used in household and similar applications such as: • Staff kitchen areas in shops, offices and other working environments • Farm houses • Clients in hotels, motels and other residential type environments •... -
Page 5: Indicator Panel Description
Indicator Panel Description Hot Water Button – Press to activate the hot water feature . The Hot icon illuminates to indicate hot water feature is selected and working . Child Lock Button – Press to activate the child safety lock feature . This de-activates the hot water feature . Ambient Water Button –... -
Page 6: Installation
INSTALLATION 1 . Install the Dispenser Place the dispenser upright . Locate the dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet . NOTICE: Do NOT plug in the power cord until the entire installation section is completed . -
Page 7: Flush The Filters
Gently tug on the tube (B) to ensure a secure connection with the feed water adapter (F) . 3 . Flush the Filters IMPORTANT: Follow this procedure every time you replace your filters. IMPORTANT: Ensure the water supply is off before you begin . Connect a filter (D) to the filter housing (C) by twisting the filter (D) clockwise. -
Page 8: Install The Filters And Complete The Installation
4 . Install the Filters and Complete the Installation After flushing, twist each filter (D and E) clockwise into the filter housings located inside the dispenser cabinet. The sediment filter (D) goes on the left, the carbon +ultra filtration filter (E) on the right . -
Page 9: Operation
OPERATION IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and lines . Dispense and dispose at least one quart of water prior to drinking any water . Turn the Dispenser On/Off IMPORTANT: Before you activate the hot and cold switches, ensure water has filled the tanks... -
Page 10: Troubleshooting
TROUBLESHOOTING PROBLEM SOLUTION • It takes up to one hour after setup to dispense cold water . • Make sure the power cord is properly connected to a working outlet . The cold water is not • Make sure the back of the dispenser is at least 20 cm from a wall and there is free airflow on all 20 cm sides of the dispenser. -
Page 11: Filter Replacement Schedule
Filter Replacement Schedule FILTER TYPE REPLACEMENT SCHEDULE FUNCTION Carbon + Ultra Reduces chlorine, taste and odor, lead 6 months or 950 gallons Filtration and cysts . Performs a coarse filtration of original Sediment 6 months or 950 gallons water . Removes mud, sand, iron, rust, and suspensions, and impurities . -
Page 12: Warranty
WARRANTY Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship . - Page 13 Contact Us Call: +1 844-257-4103 ©2019 DTWUSA...
Need help?
Do you have a question about the CLCTPOU620UVF2 and is the answer not in the manual?
Questions and answers
BRIO CLCTPOU620UVF2 is developing a water drip on the disperser tip
Trying to locate the UV filer reset button