Related Manuals for BRIO CLBL520SC
Summary of Contents for BRIO CLBL520SC
- Page 1 WATER DISPENSER MODEL NO. CLBL520SC Thank you for purchasing a Brio water cooler ® Please read and understand this manual before operating your water dispenser Retain this manual for future use...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 INTENDED USE . -
Page 3: Safety Information
SAFETY INFORMATION WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing and operating the dispenser . WARNING: This product dispenses water at very high temperatures . Failure to use properly can cause personal injury . -
Page 4: Intended Use
INTENDED USE This dispenser is intended to be used in household and similar applications such as: • Staff kitchen areas in shops, offices and other working environments • Farm houses • Clients in hotels, motels and other residential type environments •... -
Page 5: Indicator Panel Description
Indicator Panel Description Power indicator/self-cleaning light – When illuminated, indicates that the dispenser is on . When blinking, indicates that the self-cleaning feature is operating . Hot water indicator light – When illuminated, indicates Self Clean that the dispenser is heating water . Cold water indicator light –... -
Page 6: Connect A Water Bottle
3 . Connect a Water Bottle IMPORTANT: To prevent dry heating, do not turn on the heating and cooling switches until you complete the steps in this procedure . Remove the plastic wrapping and cap from the water bottle . Then clean the new bottle with a cloth . -
Page 7: Operation
OPERATION IMPORTANT: This unit has been tested and sanitized prior to packing and shipping . During transit, dust and odors can accumulate in the tank and lines . Dispense and dispose at least one quart of water prior to drinking any water . Turn the Dispenser On/Off IMPORTANT: Before you turn the dispenser on and activate the hot and cold switches, ensure... -
Page 8: Troubleshooting
TROUBLESHOOTING PROBLEM SOLUTION • It takes up to one hour after setup to dispense cold water . • Make sure the power cord is properly connected to a working outlet . The cold water is not • Make sure the back of the dispenser is at least 20 cm from a wall and there is free airflow on all 20 cm sides of the dispenser. -
Page 9: Cleaning And Maintenance
CLEANING AND MAINTENANCE Use the Self-Cleaning Ozone Feature It is highly recommended that you use the self-cleaning feature on a weekly basis to sanitize tanks and water lines . To activate the self-cleaning cycle, press in the self-cleaning switch (14), hold for 5 seconds, and release . -
Page 10: Warranty
WARRANTY Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship . - Page 12 Contact Us Call: +1 844-257-4103 ©2019 DTWUSA...
Need help?
Do you have a question about the CLBL520SC and is the answer not in the manual?
Questions and answers
Should the green light remain steady after the cleaning process or should it go out?
Does the Brio model number CLBL520SC cooler unit contain Freon?