Quick Start - Huawei ETS2251 User Manual

Do as follows, you can manage how to answer and make a call through the FWT
in a short time.
1 As shown in Figure 3-4, insert one end of the spiral cord into the jack at the
end of the handset and the other end into the jack on the main unit.
2 Install the power adapter or the battery. For the details, refer to the "
4 Installation Description".
3 Turn on the FWT and wait a few seconds for the FWT searching and
registering in the network until indicators such as time and signal appear.
Adjust the antenna to ensure fine signal strength.
4 Pick up the handset and input a call number after hearing the dialing tone.
Pressing <CALL/REDIAL>, you can dial out the number.
5 When there is a call incoming and the FWT is in standby state, you can pick
up the handset or press <HANDFREE> or <CALL/REDIAL> to answer the
call.
6 You can set the time for auto dialing. By default, it is seven seconds. Perform
the following steps for this function:
Press <MENU> to access the function menu.
Press the <UP/DOWN> scroll key to select <Settings>.
Press the <UP/DOWN> scroll key to select <Personal>.
Press the <UP/DOWN> scroll key to select <Auto-dial Time>.
Note:
<Auto-dial Time> means that the phone number you keyed in is dialed
automatically at the time you set without pressing the <CALL> key. If
the time you set for auto dialing is too short, an incomplete number may
be dialed before you key in the whole number.
5

Quick Start

HUAWEI
31