Advertisement
Activation/Deactivation of the Bluetooth Mode
After the Bluetooth mode is activated, accessing the door lock from the outside
or touching its number pad can authenticate the registered Bluetooth smart-
phone to open the door.
The Bluetooth mode is activated by default.
DING DONG
Open the battery cover, and press the
Press the [11] or [00] button and the [] button
[Register] button shortly.
to activate or deactivate the Bluetooth mode.
● For the information on the pair/unfair of a Bluetooth smart phone, see
the description of application use.
● Only smart phones with iOS 7.1 or higher and Android 4.3 or higher
Note
support this function. Whether to support Bluetooth, see the App
description.
Pairing of a smart phone
Up to eight compatible smart phones can be paired. To pair multiple smart phones,
turn off the Bluetooth of a paired smart phone, and pair another smart phone. If a
Bluetooth smart phone registered is lost, replaced, or repaired and its information
cannot be deleted from the door lock, the door lock should be initialized.
Download "sHome
Turn on the Blue-
Open the battery
Doorlock" from
tooth smart phone.
cover and press the
App Store.
[REG] button shortly.
Success: DING DONG DENG
Success: DING DONG DENG
DING DONG
Fail: DING DONG DING DONG
Fail: DING DONG DING DONG
Enter the 6-digit paring code
Enter the password and
displayed in the App of the
press the [] button.
phone, and press the [] button.
Multi-leveled Security Code Entry Mode
You can set the security mode suitable for your use when you open the door
using a password.
DING DONG
Briefly press the [Register] button on
Press the [] button after pressing the [7] or
the inner body.
[9] button, and the security mode will be set.
Door Lock Time Setup Function
This function sets the time interval between the moment the door open/closed
sensor recognizes the door as closed and the moment deadbolt locks the door.
In an environment that the door closes slowly and the deadbolt jams before the
door is fully closed, the situation can be fixed by adjusting the door lock time.
DING DONG
Open the battery cover of the
Press [51] ~ [59] button, and then
inner body and briefly press the
press [] button.
[Register] button.
Set up Instructions for Alarm and Anti unlock functions
Alarm function
When this function is activated, an alarm sound and light will turn on for approxi-
mately 5 minutes duration.
Anti-Bypass function
When this function is activated, the internal handle will become tightened to
prevent bypass attempts through door edge tools will be minimized.
Set up the Alarm function
Set up the Anti-Unlock function
DING DONG DENG
When the door is closed, user can
Press [] and hold.
set up the alarm function by press-
After 3 seconds, the alarm will be
ing and holding the [
] button for 3
come active.
seconds until sound confirmation.
Release the Alarm function
Release the Anti-Bypass function
Or
After touching the Number Pad,
Press the [CLOSE] button to release the
contact a registered card, or enter
internal handle from Anti-Bypass function.
the password and then press the
When this function is active, it may be
[] button.
harder to pull the internal handle for elderly
or children to open the door from inside.
● Anti-Bypass function should only be set up when there is no one inside.
Warning
Double Authorization Mode Setting
You can delete Double authorization mode requires both card and
password to open the door, ensuring more security.
To setup the double authorization mode, one or more cards must be registered.
DING DONG DENG
[11] button: Activate the Bluetooth
mode.
[00] button: Deactivate the Blue-
tooth mode.
Briefly press the [Register] button on
the inner body.
Two-factor Authentication Mode Operation
Touching [Number
Pad].
Sound Setting and Releasing
DING
DING
DONG
DONG
The sound that is generated when the number buttons are pressed, when the
door is locked or when the locked door is unlocked, can be set according to the
If the number pad
user's preference. The product is set to generate all sounds at the factory.
lights, enter '88' and
press the [] button.
The smart
phone is
- [ 0 ] Button: All sounds except the alarm sound are deactivated.
paired.
- [1] and [2] Buttons: All sounds are activated and the sounds get bigger as the step
Automatic/Manual Locking Setting
The Automatic Locking mode allows for automatic locking of the door when it is
closed.
DING DONG DENG
[7] Button : Multi-leveled Security
Code Entry Mode
[9] Button : Common Mode
- Automatic: The door is automatically locked 1 seconds after being closed.
- Manual: The door does not lock automatically, and [CLOSE] button must be
pressed from the inside, touch [Number Pad] to close the door.
7
Intrusion Detection Function
This function generates the alarm sound when an attempt is made to forcefully
open the door from the inside or the outside.
(This is a basic function of the lock, and cannot be separately set or released.)
If the door is forcefully opened while locked, the door opening sensor
detects it and generates the alarm sound.
Default: 1 second
[51] : 1 second
Replacing the Batteries
[59] : 9 second
Battery Replacement Alarm Generation
If the melody of "Blues for Elise" sounds when opening the door with the pass-
word or a card (key tag), it is time to replace the batteries.
(The low battery indicator is lighted when the melody sounds.)
Replacing the Battery
Replace all 8 batteries within a 1 week of the first alarm sound.
- The unit will stop operating suddenly if the batteries are not replaced.
● Depending on battery manufacturer, date of manufacture and the user
DING DONG DENG
Warning
● If the poles of the batteries are not placed properly, the lock will not operate
● Liquid leaks from batteries can damage the product. Check the batteries
● After the battery replacement alarm has sounded, password/card information
Using the Emergency Battery
If the batteries are not replaced after their replacement time comes, they will be
completely discharged and the lock will not operate.
BEEP BEEP BEEP~
Opening the Door Using an Emergency Battery
Purchase an emergency battery (9V) at the nearest store.
- As the alkaline batteries offer longer life, they are recommended over the manganese
batteries or rechargeable ones.
While connecting a 9V battery to the contact point, it is available to use card
10
and password.
DING DONG DENG
DING DONG
[4] Button : Double authorization
mode on
[6] Button : Double authorization
mode off
Press the [] button after pressing the
[4] or [6] button, and the authorization
mode will be set.
Success:
DING DONG
DENG
Fail: DING DONG
DING DONG
Enter the password when
Touch the card on to
the number pad is lighted,
the [Card Reader], if the
and press the [] button.
authentication is successful,
the door will open.
Open the battery
Put the [Sound Control]
cover on the inner
switch on one of [0], [1], or
body.
[2], and close the battery
cover.
become higher.
Open the battery
Set the [Automatic/Manual Lock-
cover on the inner
ing] toggle switch of the Inner
body.
Body to the 'A'/'M' position.
environment, the duration of use may vary.
(In the case of average use, given as 10 times a day, 8 AA alkaline
1.5Vbatteries can last for 10 months.)
normally.
regularly (every 6 months).
cannot be registered, changed, deleted, initialized or configured until the
batteries are replaced.
Or
Security Assurance Mode Activation/Deactivation
At-home security mode is to prevent opening of the door from outside while
someone is inside.
Security Assurance Mode Activation
DING DONG DENG
While the door is locked, press
[CLOSE] button on the inner body
part for 3 seconds.
Security Assurance Mode Operation
Or
Success:
DING DONG
DENG DONG
Rapid beeping
Fail: DING DONG
DING DONG
● When the security assurance function is activated, the door cannot be
unlocked from the outside, so please be careful. Be especially careful
Warning
not to allow children to set this mode accidently from the inside.
Welcome Function On/Off
The welcome function is a convenient function that automatically activates the
authorization standby mode when a user approaches the door, even before
touching the number pad.
DING DONG
Open the battery cover and press
[Registration] button briefly.
On and Off / Function Description
- Welcome function on: The mode will automatically activate the authorization
standby mode when a user approaches the door lock.
- Welcome function off: The mode will authorize a user when the user enters the
password on the number pad or connects a card to the number pad.
- One-minute alarm function on/ off: When someone remains in front of the door
lock for more than a minute, this mode will sound the tamper prevention alarm.
● The factory defaults are set with the welcome function on and the alarm
function off.
● The working distance of the infrared sensor can differ depending on light
Caution
conditions and other environments. When the front door is exposed to sun
light or constant bright lights it is advised to limit the usage of the sensor
as it might sound the alarm.
8
Alarm Sound (Prank Prevention Function)
This function generates an alarm sound and deactivates lock operation
when it is improperly handled from the outside.
This alarm will sound if an attempt is made to open the door with an invalid card, or
if a wrong password is entered five times in a row.
The alarm sound is generated, and the lock is deactivated for 3 minutes. While the
door is in this inactive mode, a single "DING" sound is generated every 10 seconds
and seven consecutive "DINGS" will sound after 3 minutes. Following this, the lock
is released from inactive mode.)
Releasing the Alarm
Inside
Press the [Register] button.
Outside
Apply the registered card or key tag to the card reader, or enter
the password and then press the [] button.
Built-in Fire Detection Function
This function generates the alarm sound when fire is detected so that the resi-
dence can quickly respond. The built-in fire detection function is a basic function
of the lock, and cannot be released by the user.
Fire detection function is operational at about 60 °C ± 10 °C; this can vary
depending on the installation environment.
When fire occurs, the temperature sensor detects it and flashes the [Close] button
while generating the alarm sound.
The door is automatically opened after the alarm sound has stopped.
(The lock resumes normal operation if the inside temperature returns to
a normal level.)
Product Specifications
Item
Voltage
AA Alkaline 1.5 Batteries (LR6) 4EA or 8EA (6V)
Emergency Power
9V Battery (6LF22) (Separately sold)
Source
Electronic Control Method
Operation Method
(Password, Bluetooth, Card, Key Tag)
Weight
2.6 kg (including both inner and outer bodies)
Outer Body
(including
the handle)
Product
Dimensions
Inner Body
(including
the handle)
●
The contents of this user guide are subject to change without prior notice to the user
in order to enhance performance of the product.
11
Security Assurance Mode Deactivation
DING DONG DENG
DONG
Pull the inner body handle
to open the door, and it
will deactivate.
Inside: Press the [CLOSE] button, then the sound
for action-unavailable will be heard.
Outside: Press the [Number Pad] or touch with a
card, then the sound for action-unavail-
able will be heard.
DING DONG DENG
[1]+[] button: Welcome function on, the one-
minute alarm function on
[2]+[] button: Welcome function on, the one-
minute alarm function off
[3]+[] button: Welcome function off
9
Specifications
77.4mm (W) X 313.4mm(H) X 66.8mm(D)
79mm (W) X 290mm(H) X 80.3mm(D)
12
Advertisement
