Download Print this page

Samsung SHP-DS705 User Manual

Digital smart door lock

Advertisement

Quick Links

SHP-DS705
USER MANUAL
Pairing with your
Smart phone
(
page)
3
Conveniently open the door through the
Bluetooth function of a smart phone.
Welcome Mode
(
page)
4
When a user gets close to the door lock,
The authorization standby mode will
Automatically activate.
Silent Mode
(
page)
5
When going in or out, the sound of
the key entering and door opening
will be suspended.
(
page)
Double Security
6
Security check with the card and the password
can be optionally applied.
At-home Security
(
page)
7
When someone is inside the house,
authorization for entry from the outside
will be prohibited.
High temperature Detection
(
page)
8
Generates alarm in case of a fire
(
page)
Using the Emergency Battery
9
Using the Emergency Battery
Setting guide (
,
page)
10 11
www.samsungsds-nss.com/en
Card and Key Tag Registration
When a new card or key tag is registered, those already registered are not deleted
but additionally registered. If you do not want to register the existing card, delete
all cards and register a new card. Up to 20 cards, including the key tag, can be
registered.(Only ISO14443 A Type is available.)
1. Pressing the [Register] Button
2. Entering the Password
DING DONG
Open the battery cover of the
When the number pad is lighted,
inner body and briefly press
enter the password and then
the [Register] button.
press the [ ] button.
3. Placing the Card or Key Tag
on the Card Reader
4. Registration Done
DING DONG DENG
Place the card or key tag
To terminate registration,
to be registered on the
press the [Registration] button.
card reader of the outer body.
To register multiple cards or key tags, lightly place another card or key
tag on the card reader within 20 seconds after registering the previous
Warning
card or key tag.
To make sure the card and key tag has been properly registered,
and close the door.
Please, be aware that the only provided card and key tag by Samsung
SDS Co. Ltd. shall work properly on the regular use for this door lock.
Welcome Mode
The Welcome mode is a convenient function that automatically activates the
authorization standby mode when a user approaches the door, even before
touching the number pad.
Welcome mode on: The mode will automatically activate the authorization standby
mode when a user approaches the door lock.
Welcome mode off: The mode will activate the authorization standby mode when
user touches the number pad.
One-minute alarm function on / off: When someone remains in front of the door lock
for more than a minute, this mode will sound the tamper prevention alarm.
The factory defaults are set with the welcome mode on and the
one-minute alarm function off.
Warning
The working distance of the infrared sensor can differ depending on
light conditions and other environments. When the front door is exposed
to sun light or constant bright lights it is advised to limit the usage of the
sensor as it might sound the alarm.
Product Components
The product components used may vary depending on the installation
environment.
Outer Body
Key Tag (For B2C Only) (2EA)
User Manual
Product Warranty
Outer Body Part
Entry Complete /
Silent Mode Switch Button
Proximity Sensor
Inner Body Parts
Built-in
Wireless Module
(Optional)
PTSP2240ONTA ED:01
Opening the Door from Outside with a Password
When purchased, the product is set to Randomizer mode initially.
1. Randomizer Mode
When approached the door lock (When applying the "welcome function")
or if the number pad is touched, a lighting will appear on the number pad.
Success:
DING DONG DENG
→ DING DING
Fail:
DING DONG DING DONG
When two Random buttons are
lighted, press the buttons in order.
2. Common Mode
When approached the door lock (When applying the "welcome function")
or if the number pad is touched, a lighting will appear on the number pad.
DING DONG DENG
Silent Mode
Before entering the password, press the [ ] button and enter the password, then both
the sound of the key entering and the door opening will be suspended. It is a useful
function if you do not want to disturb neighbors when you go in and out at night.
Password must be entered after the light is on, and if does not, touch
[Number Pad] and re-enter.
Note
To cancel, press [ ] button and re-enter.
If the password is wrong 5 times, "peep" warning alarm will sound 20
times and the system will shut-down for about 3 minutes. When
malfunction happens, "beep" will sound every 10 seconds, and stop
mode will be turned off automatically after 3 minutes with multiple 'beeps'.
Opening the Door from Outside with a Card or Key Tag
The door can be opened from outside using a card or key tag.
Place the registered card or key tag on the card reader.
Placing the Card or Key Tag on the Card Reader
When the welcome function is deactivated, touch the number pad and
place the card to open the door.
Note
Note
4
Inner Body
Strike
Fastening
Installation Jig
Panel
'AA' Batteries (LR6) (4EA)
Installation Paper
Installation Screws
Spacer
Number Pad
Battery Replacement
Time Alert
Away Security Setup
Card Reader
Reset Switch
External Power
Contact Port
Battery Cover
Battery Holder
1.5V AA Batteries
Deadbolt
OPEN Button
Manual knob
Open-door sensor
Registration Button
Success:
DING DONG DENG DONG
Fail:
DING DONG DING DONG
When the numbers on the number
pad are lighted, enter the password
and press the [ ] button.
Success:
DING DONG DENG DONG
Fail:
DING DONG DING DONG
Enter the password when the number pad
is lighted, and press the [ ] button.
Place the card or key tag
Success:
on the card reader.
DING DONG DENG DONG
The door will be opened
Fail:
after 1 second.
DING DONG DING DONG
※ All registration and settings operate only when the door opens.
Pairing with your Smart phone
'sHome
Doorlock'
Download
For the more information about registering, please refer the
(Bracket)
description of application use.
Up to
eight
compatible smart phones can be paired.
To pair multiple smart phones, turn off the Bluetooth of a paired
Note
smart phone, and pair another smart phone.
If a registered Bluetooth enabled smart phone is lost or repaired,
your registration information cannot be deleted from the door lock.
It is recommend that the door lock should be initialized. (Refer page 7)
Please check support smart phone model on the web page.
Password Register/ Change
The password can be 4~12 digits number. Only one password can be registered.
The initial password is set to '1234'.
1. Pressing the [Register] Button
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
3. Entering a New Password
DING DONG DENG
Enter the new password (4 to 12 digits)
and then press the [ ] button.
To prevent an intrusion, it is recommended to make a password with
6 or more digits (from 0 to 9 can be set).
Warning
Manage your password with care so that unauthorized people will not
have access to it. Regularly changing your password can reduce the
risk of it being leaked.
A registered password cannot be deleted. Register a new password.
2
Double Security
Double Security mode requires both card and password to open the door,
ensuring more security. To setup the Double Security mode, more than
1 card must be registered.
Touching
[Number Pad].
Enter the password when
the number pad is lighted,
and press the [ ] button.
Place the card on to the [Card
Reader]. If the authentication is
successful, the door will open.
Take your card when going out after the Double Security mode is set.
You cannot open the door if there is no card.
Warning
Opening the Door from the Inside
DING DONG DENG DONG
When the door is locked, press
the [OPEN] button on the Inner
Body to open the door.
Closing the Door from the Inside
Automatic Locking Setting
The door is automatically locked 1 seconds after the door is closed.
Manual Locking Setting
DING DONG DENG DONG
When the door is locked, press
the [OPEN] button on the Inner
Body to open the door.
5
5
from App Store / Google Play Store.
2. Entering the Current Password
Success:
DING DONG DENG
→ DING DING
Fail:
DING DONG DING DONG
When the number pad is lighted, enter the
current password('1234' after initialization)
and then press the [ ] button.
3
Success:
DING DONG DENG
Fail:
DING DONG DING DONG
Success:
DING DONG DENG DONG
Fail:
DING DONG DING DONG
OR
When the door is locked, turn the
[Manual knob] in the direction of
[
] to open the door.
OR
When the door is locked, turn the
[Manual knob] in the direction of
[
] to lock the door.
6
6

Advertisement

loading

Summary of Contents for Samsung SHP-DS705

  • Page 1 Password must be entered after the light is on, and if does not, touch and close the door. ● [Number Pad] and re-enter. Please, be aware that the only provided card and key tag by Samsung Note ● Opening the Door from the Inside To cancel, press [ ] button and re-enter.
  • Page 2: Replacing The Batteries

    At-home Security Set up Instructions for Alarm functions Replacing the Batteries Battery Replacement Alarm Generation This is a basic function of the lock when a user goes out. At-home security mode is to prevent opening of the door from outside while someone is inside.