Experiencing The Surround Sound - Sanyo FWSB415E Owner's Manual

Experiencing the surround sound

1
Press on the remote control to activate the surround sound.
• The LEDs blink in a spread manner, from the center (OPTICAL) to both sides.
Surround status
ON
2
If you want to set surround sound to off, press
• The 2 LEDs (USB and AUX) blink twice.
Surround status
OFF
NOTE(S)
• The default setting is off.
• This setting will remain while the soundbar is in standby mode.
EN
LED lighting patterns
INPUT
LINE USB OPTICAL AUX
È
INPUT
LINE USB AUX
OPTICAL
È
INPUT
LINE USB OPTICAL AUX
LED lighting patterns
INPUT
LINE USB OPTICAL AUX
Sound effects
PAIR
PAIR
Outputs high realistic sounds.
PAIR
on the remote control once again.
Sound effects
PAIR
Outputs the original sound.
– 13 –