Table of Contents
Advertisement
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that
require the use of traffic control and data priority manipulation.
The following parameters can be configured:
Checkbox:
Name:
Priority:
Protocol:
Local IP Range:
Remote IP Range:
Application Port:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S
W
R
AMSUNG
IRELESS
OUTER
Tick this option to enable the rule specified.
Enter a custom name for the rule being created here. This name is used for identification.
Select the appropriate priority requirement from the drop-down menu that will be applied
to this rule. Option to choose from are Highest, Higher, Normal, and Best Effort.
Select the protocol used for the application for in the drop-down menu and it will auto-
matically place it in the Protocol field.
Enter the local IP range used here. This is the IP range of you Local Area Network. The
Router's IP cannot be included in this range.
Enter the remote IP range used here. This is the IP range of the public network from the
Internet Port side. To apply this rule to any IP addresses from the public side, enter the
range 0.0.0.1 to 255.255.255.254.
Enter the application port number used here.
U
M
SER
ANUAL
P
42
AGE
Advertisement
Table of Contents
