Table of Contents
Advertisement
Internet Connection Type: PPTP (Username / Password)
Select PPTP (Point-to-Point Tunneling Protocol) from the drop-down menu if your ISP uses a PPTP connection. Your ISP
will provide you with a username and password. This option is typically used for DSL services.
The following parameters can be configured:
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP Address: Enter the PPTP Gateway IP address used here.
PPTP Server IP Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time:
Primary DNS Server:
Secondary DNS Server:
S
W
R
AMSUNG
IRELESS
OUTER
Here the user can specify whether this Internet connection requires the use of a Dynamic
or Static IP address. PPTP usual requires a Dynamic IP configuration.
Enter the PPTP IP address used here. This option is only available if Static IP is selected.
Enter the PPTP Subnet Mask used here.
Enter the PPTP Server IP address used here. This is normally the same a the PPTP Gate-
way IP address.
Enter the PPTP username used here.
Enter the PPTP password used here.
Re-enter the PPTP password used here.
Use the radio buttons to specify the reconnect mode. The user can specify a custom
schedule or specify the On Demand, or Manual option. To specify a custom sched-
ule, use the drop-down menu to select one of the schedules that has been defined in the
Schedules page. To create a new schedule, click the New Schedule button to open the
Schedules page. Schedules will be discussed later.
Enter a maximum idle time during which the Internet connection is maintained during
inactivity. To disable this feature, enable Auto-reconnect.
Enter the Primary DNS IP address used here.
Enter the Secondary DNS IP address used here. This field is normally optional. Only one
DNS address is required for a functional Internet connection, but using a second DNS
address provides more stability.
U
M
SER
ANUAL
P
23
AGE
Advertisement
Table of Contents
