Table of Contents
Advertisement
ii)
Apply the fastener hook where you
want to attach the ready indicator
(behind the monitor) (
2
Attach the ready indicator.
Join the hook-and-loop fasteners to
attach the ready indicator (
the volume adjustment buttons and the
mute switch can be operated and that the
LED lamps and IR data port can be seen.
4.4.3
Attaching a ready indicator to a wall or post
This is suitable in cases in which the ready indicator and the image-capture computer
are not usually moved, including such environments as an X-ray exposure room.
1
Attach hook-and-loop fasteners.
i)
Apply the fastener loops to the ready indicator
(on the side of the speaker holes) on the
positioning rib ( ).
The fastener loops are attached using the adhesive
on the back.
Information
Remove any oil, water, or dust on the attachment side of the hook-and-loop
fastener using a cloth slightly damped with a neutral detergent.
ii)
Apply the fastener hook where you
want to attach the ready indicator (on a
wall or post) (
).
). Check that
).
4
Operating procedures
Fastener hook
Positioning rib
Fastener loop
Fastener
hook
37
Advertisement
Table of Contents
