Canon AX-B2735W Manual page 34

4
Operating procedures
i)
The READY LED on the detector flashes
during preparation for examinations.
When the detector and control system are
in exposure ready status, the READY LED
on the detector and two LED lamps on the
ready indicator light up, and a single beep
is emitted.
• Arrange an object in the correct posture and position the detector aligning it with the
target body part.
• Position the X-ray generator to adjust the irradiation field.
• Before exposure, check the detector's ready status.
Make sure that READY LED is lit. This means that the system is ready to start an
examination.
The LED lamps on the ready indicator light up or flash, and the ready indicator beeps
to indicate the detector status.
34
Select the information or protocols
on the screen and start the
examination.