NEC Express5800 Series Maintenance Manual page 30

Chapter 1 Maintenance
[?] When Starter Pack is installed on Windows Server 2008 R2, the below message is sometimes
displayed for a moment upon shutdown
1 program still needs to close:
(Waiting for) Task Host Window
→ No problems for system operation.
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/975777/en-us
[?] The system was installed as Workgroup although it is set to join the domain.
Is the LAN cable properly connected?

→ If the LAN cable is not connected, the system is installed in workgroup setting, not in domain join
setting. After the OS is started, join the domain.
[?] The following features are installed when Windows Server 2008 R2/Windows Server 2008 IIS is
installed using EXPRESSBUILDER.
Windows Process Activation Service

― Process Model
― Configuration APIs
Remote Server Administration Tool

― Role Administration Tools
― Web Server (IIS) Tools
→ The features listed above are activated because they are required for the installation of IIS basic
features.
[?] The Telnet Service is not installed
→ Change the computer name to 14 characters or less, and then install the Telnet Service according
to the following procedure:
How to install the Telnet Service
(1) Click Run on Start menu.
(2) Enter tlntsvr/service in the Open box, and then click [OK].
(3) Click Start menu, point to Control Panel, click Administrative Tools, and then click Services
to confirm whether the Telnet Service is registered.
* When the installation of Telnet Service is finished, there is no problem if the computer name is
set to 15 characters or more.
[?] Fails to execute "Create a parameter file for Windows OS"
→ "Create a parameter file for Windows OS" must be run using Microsoft
If it does not start, associate the file type with Microsoft
process.
(1)
(2)
30
Select Run in Windows Start menu.
Enter %windir%\system32\mshta.exe/register.
Express5800/E120e-M Maintenance Guide
®
HTML Application host.
®
HTML Application host via the following
5. Troubleshooting