HP R2200 ERM Installation Instructions

HP UPS R/T2200 ERM
Installation Instructions
© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number 414187-003
August 2008 (Third Edition)
Overview
The ERM consists of two battery packs in a 2U chassis. The ERM
connects directly to a UPS R/T2200.
At the HP recommended 80 percent load, one ERM extends the
available UPS runtime up to 30 minutes.
For more information about any of the topics covered in this
document, see the UPS user guide located on the documentation CD
or HP website (http://www.hp.com/go/rackandpower).
Precautions
WARNING: A risk of personal injury from electric shock
and hazardous energy levels exists. The installation of
options and routine maintenance and service of this
product must be performed by individuals who are
knowledgeable about the procedures, precautions, and
hazards associated with AC power products.
WARNING: To prevent personal injury from earth
conductor leakage current:
Do not operate the UPS while disconnected from the
•
utility power source.
• Disconnect load devices before disconnecting the UPS
from the utility power source.
WARNING: To prevent personal injury, prepare the area
and observe all materials handling procedures when
transporting the ERM. When fully assembled, the ERM
weighs 28.6 kg (63 lb).