Table of Contents
Advertisement
(1. 3. 2) Changing each setting in 1P SR mode
Move up down
By pushing
MENU UP, DOWN
-- SHUTTER --
MODE
E.TRG
TRG.P
EXP.
PART
<MODE = E.TRG E.TRG = 1P SR>
(a) Changing the polarity of inputting trigger pulse setting
1 Set the " " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either
(b) Changing 1P SR exposure time setting
1 Set the " " to EXP. by pushing [MENU UP], [MENU DOWN] buttons.
2 Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.
(c) Changing the partial scanning setting
1 Set the " " to PART by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons.
IK-TF7(E)
Set by pushing
DATA UP, DOWN
E.TRG
1P SR
16ms
OFF
,
by pushing [DATA UP], [DATA DOWN] buttons.
Page 15
• Shutter mode MANU, SS, E.TRG
• E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at 1P SNR and 1P SR
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
• Exposure time setting at 1P SNR and 1P SR
0.01 ms
0.02 ms
0.4 ms
0.01 ms
0.02 ms
step
step
• Partial scanning switch OFF/60fps/90fps
2004.03.24, 0:59 PM
1 ms
16 ms
0.1 ms
1 ms
step
step
15
Adobe PageMaker 6.5J/PPC
Advertisement
Table of Contents
