Use Stopwatch; Use A Timer; Use Of Flashlights; Setting Alarm Clock - Huawei TalkBand B6 Use Manuallines

HUAWEI TalkBand B6 use
guidelines
HUAWEI TalkBand B6 use
guidelines
●
●
●
2.2 Use
stopwa
tch
In the bracelet application list, click stopwatch, click
Start timing, click
click time zero, right slide or click the ring side button, stopwatch in
the background timing.
The stopwatch supports a maximum time of 99:59:59, which stops automatically after
reaching the maximum time.

2.3 Use a timer

On the bracelet app list, Click "timer ", Select or set timing time. The
bracelet provides 8 countdown times by default :1 minute ,3 minutes ,5
minutes ,10 minutes ,15 minutes ,30 minutes ,1 hour ,2 hours. You can also
click Custom to set the timing time.
click exit countdown, right slide or click loop side button timer in the
background timing. Timing end bracelet vibration reminder (headset in
wristband) or prompt sound reminder (when wearing headphones).

2.4 Use of flashlights

In the application list, click the "flashlight" screen to display light,
touch the screen to turn off the flashlight, touch the screen again to
turn on the flashlight, slide right or click on the ring side button to
exit.

2.5 Setting alarm clock

Method 1: set smart / transaction alarm clock on the bracelet
1.
Document version
01(2020-07-30)
Note
After opening the non-disturbance mode:
The phone calls will be pushed to the bracelet, but the bracelet will not
remind, but can long press the side key to refuse to answer the call, from the
wristband out of the headset to answer the call.
Messages and notices are no longer reminded, wrist lifting is not bright screen.
Alarm clock will vibrate normally.
In the bracelet application list, select alarm clock and click add alarm
Copyright ©Huawei
Technology Limited
Click start countdown, click pause countdown,
2.
Applicati
Pause timing,
20