Stopwatch - Huawei Band 3 Pro Terra Online Help

Terra Online Help_V1.0
Terra Online Help_V1.0
3.
4.
5.

5.5 Stopwatch

To use the Stopwatch function on your band, perform the following steps:
1.
2.
3.
Issue 01 (2018-11-19)
When using the Timer function for the first time, access the Timer settings screen of
−
your band, and set the hours, minutes, and seconds. The value range for hours is
0–12, while that of minutes and seconds is 0–59.
If you have used the Timer function before, open the Timer screen you accessed last
−
time and touch
Touch to start the Timer.
Touch to pause the time, and touch
Your band will vibrate and its screen will switch on to notify you when the set time has
been reached. Swipe right on the screen or touch
Perform no operations and Timer will automatically close after 1 minute.
When Timer is enabled, the on-going timing screen will display when you return to it again from the
home screen.
Go to More > Stopwatch on your band screen.
Touch to start timing. The maximum display time for Stopwatch on your
band is "59:59.99s". The band screen will remain on while it is running.
While Stopwatch is running, you are able to:
Touch
−
Touch
−
Touch
−
Swipe right on the screen and
−
time, and touch
Copyright © Huawei Technologies Co., Ltd.
, and set the hours, minutes, and seconds.
to stop the clock.
to continue taking time.
to end timing and reset Stopwatch at "00:00.00".
will pop up, touch
to exit and return to the previous screen.
5 Setting alarms
to end it.
to turn off the Timer.
to continue taking
27