Removing Optional Type-C Module; Installing Optional Type-C Module - Dell OptiPlex XE4 Tower Service Manual

Removing optional Type-C module

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the optional Type-C module and provide a visual representation of the removal
procedure.
Steps
1. Remove the two (M3X3) screws that secure the optional Type-C module to the computer chassis.
2. Disconnect the Type-C module cable from the connector on the system board.
3. Remove the Type-C module from the computer.

Installing optional Type-C module

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the optional Type-C module and provide a visual representation of the installation
procedure.
86 Removing and installing components
before working inside your computer.