Removing Optional Sma Module - Dell OptiPlex XE4 Tower Service Manual

Steps
1. Align the graphics card with the PCI-Express card connector on the system board.
2. Using the alignment post, connect the graphics card in the connector and press down firmly. Ensure that the card is firmly
seated.
3. Lift the pull tab to close the PCIe door.
Next steps
1. Install the side cover.
2. Follow the procedure in

Removing optional SMA module

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 39