Assembling The Burners - Miele ProLine CS 1018 G Operating And Installation Instructions

Cleaning and care

Assembling the burners

a
b
c
d
 Place burner head  on to burner
base  so that the thermocouple 
and the ignitor  extend through
their respective holes in the burner
head.
The lobes  on the burner cap must
fit into the recess  on the burner
head. The lobes  on the burner
head must fit into the recess  on
the burner base.
 Replace the burner ring .
 Then place the burner caps  and 
in position.
32
a
b
c
d
e
f
g

The burners cannot function
correctly if they are incorrectly
assembled. This can lead to damage
to the appliance and injury.
Ensure that all parts of the burner are
reassembled in the correct order.