Table of Contents
Advertisement
Assembling the burners
Place the burner head onto the
burner base so that the ignition
electrode and the thermocouple
extend through their respective holes
in the burner head. The burner head
must click into place correctly.
Then place the burner caps and
in position.
Ensure that all parts of the burner are
reassembled in the correct order.
Cleaning and care
Functional check
Ignite all burners to check that they
are burning correctly:
- The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
- On the highest setting, the flame
must have a distinctive and visible
core.
31
Advertisement
Table of Contents
