Table of Contents
Advertisement
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A message will appear on your oven
display if a software update is available.
You can install the update immediately
or postpone this until later. When the
oven is turned on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not turn the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
- Some software updates can only be
carried out by Miele Customer
Service.
Software version
The software version menu option is for
use by Miele Customer Service. You do
not need this information for domestic
use.
Showroom program
This function enables the oven to be
demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo Mode
If you have Demo mode activated,
Demo mode is active. The appliance will
not heat up
will appear when you turn
on the oven.
-
On
Touch the OK sensor button for at
least 4 seconds to activate Demo
mode.
-
Off
Touch the OK sensor button for at
least 4 seconds to deactivate Demo
mode. You can use the oven as
normal.
Factory default
-
Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
-
Recommended temps.
Any recommended temperatures that
have been changed will be reset to
the factory default settings.
Settings
39
Advertisement
Table of Contents
