Table of Contents
Advertisement
Settings
Calibrate temperature
You can change the temperature in
increments in all operating modes and
automatic programs so that it is higher
or lower in the oven compartment than
displayed.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled, the oven
compartment temperature is much
higher than displayed. If one segment is
filled, the oven compartment
temperature is much lower than
displayed.
Booster
The
Booster
function is used to quickly
preheat the oven.
-
On
The
Booster
function is automatically
turned on during the preheating
phase of a cooking program. The
browning/broiling element, ring
heating element, and blower all
preheat the oven compartment to the
set temperature at the same time.
-
Off
The
function is turned off
Booster
during the preheating phase of a
cooking program. Only the heating
elements for the selected operating
mode are used to preheat the oven
compartment.
36
Recommended temps.
If you often cook with temperatures that
differ from the default, the
recommended temperatures can be
changed.
After selecting this menu option, the list
of operating modes will appear in the
display together with their
recommended temperatures.
Select the operating mode you want
to use.
Change the recommended
temperature.
Confirm with OK.
Self clean recommended
You can set whether the
recommendation for carrying out the
Self Clean function will appear (
will not appear (
Off
Cooling fan run-on
The cooling fan will continue to run for a
while after the oven has been turned off
to prevent any humidity building up in
the oven, on the control panel, or in the
cabinet carcase.
-
Temperature controlled
The cooling fan turns off when the
temperature in the oven drops below
approx. 160°F (70°C).
-
Time controlled
The cooling fan turns off after a
period of about 25 minutes.
On
) or
).
Advertisement
Table of Contents
