Hitachi SAMURAI Series Service Manual page 43

2 Control Functions
Control functions on the module
(I)
COOL
Thermo ON conditions are the same as in
normal outlet water temperature control.
It can be set for both cooling and heating
operation. It is also possible to switch the
setting values with "2.1.10 2-temperature
setting function".
35 SMGB0120 rev.0 - 11/2017
(II)
COOL/HEAT
Thermo ON conditions are
the same as in normal outlet
water temperature control.
It can be set for both cooling
and heating operation. It is
also possible to switch the
setting values with
2-temperature setting
function".
Select "Enable"
Display the input window with [INPUT] key
Input the setting value with up and down keys
Confirm with [ENT] key
Cancel with [CAN] key
Select "Enable"
Display the input window
with [INPUT] key
Input the setting value with
up and down keys
Confirm with [ENT] key
"2.1.10
Cancel with [CAN] key
2