Harbor Breeze MERRIMACK II 41125 Manual
  1. Manuals
  2. Brands
  3. Harbor Breeze Manuals
  4. Fan
  5. MERRIMACK II 41125
  6. Manual

Harbor Breeze MERRIMACK II 41125 Manual

Hide thumbs

Advertisement

Table of Contents

Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Purchase Date ___________________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Sunday.
VR20328
MERRIMACK II CEILING FAN
1
ITEM #1024423, 1461048, 2758997
MODEL #41125, 42073, 42241
LISTED FOR
DAMP LOCATION
Español p. 23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MERRIMACK II 41125 and is the answer not in the manual?

Questions and answers

Related Manuals for Harbor Breeze MERRIMACK II 41125

Summary of Contents for Harbor Breeze MERRIMACK II 41125

  • Page 1 ITEM #1024423, 1461048, 2758997 MERRIMACK II CEILING FAN MODEL #41125, 42073, 42241 Español p. 23 Harbor Breeze® is a registered trademark of LF, LLC. All Rights Reserved. LISTED FOR DAMP LOCATION ATTACH YOUR RECEIPT HERE Purchase Date ___________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Package Contents ..............3 Hardware Contents .

  • Page 3: Package Contents

    PACKAGE CONTENTS PART DESCRIPTION QUANTITY Downrod Downrod Pin (preassembled to Downrod [A]) Downrod Clip (preassembled to Downrod [A]) Mounting Bracket (preassembled to Canopy [E]) Canopy Canopy Cover (preassembled to Canopy [E]) Yoke Cover Light Pan Glass Globe Blade Arm Blades Set Screw (preassembled to Motor Assembly [N]) Phillips-Head Closemount Screws (preassembled to Motor Assembly [N]) Motor Assembly...

  • Page 4: Hardware Contents

    HARDWARE CONTENTS (shown actual size) Wire Connector Blade Screw Blade Washer Pull Chain Extension Motor Screw Qty. 3 + 1 extra Qty. 15 + 1 extra Qty. 15 + 1 extra Qty. 2 1 extra...

  • Page 5: Safety Information

    SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit breakers. • Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199.

  • Page 6: Preparation

    SAFETY INFORMATION CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present. CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are secured. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 7: Initial Installation

    INITIAL INSTALLATION 1. Turn off the circuit breakers and the wall switch to the fan supply line leads. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. Determine the mounting method to use. Standard mounting is best suited for ceilings 8 ft.
  • Page 8 INITIAL INSTALLATION 4. Loosen all four mounting bracket screws (X), then completely remove the two mounting bracket screws (X) from the round holes of canopy (E). Set aside for later use. Detach mounting bracket (D) from canopy (E). 5. Secure the mounting bracket (D) to the outlet box Standard or using screws and washers provided with the outlet Closemount...

  • Page 9: Standard Or Angle Mounting Instructions

    STANDARD OR ANGLE MOUNTING INSTRUCTIONS 1. Remove the downrod pin (B) and downrod clip (C) from the downrod (A). Then partially loosen the set screws (L) in the yoke at the top of the motor assembly (N). 2. Insert the downrod (A) through the canopy (E) and yoke cover (G).
  • Page 10 STANDARD OR ANGLE MOUNTING INSTRUCTIONS 4. Depending on the length of downrod you use, you may need to cut the lead wires back to simplify the wiring. If you decide to cut back the lead wires, it is suggested you do so in the following manner: Take the lead wires and make sure you have pulled them all the way 8 in.

  • Page 11: Closemount Instructions

    CLOSEMOUNT INSTRUCTIONS 1. Remove and discard the canopy cover (F) from the bottom of the canopy (E). Note: The downrod (A), canopy cover (F), and yoke cover (G) are not used in this type of installation. 2. Remove three Phillips-head closemount screws (M) from the top of the motor assembly (N).

  • Page 12: Wiring

    WIRING WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12-gauge and/or there is more than one house wire to connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

  • Page 13: Final Installation

    FINAL INSTALLATION Note: Closemount installation will not have the downrod (A), yoke cover (G), or canopy cover (F). 1. Align the canopy (E) over the loose mounting bracket screws (X) preassembled on mounting bracket (D). Place the keyholes of the canopy (E) onto the mounting bracket screws (X) and rotate the canopy (E) clockwise.
  • Page 14 FINAL INSTALLATION 4. Install the blade arm (J) to the underside of the motor assembly (N) with motor screws (R) previously removed (Step 6, page 8). Tighten with Phillips screwdriver (not included). Repeat for each blade arm (J). 5. Remove one of the three fitter plate screws (O) from the fitter plate (P) and save.
  • Page 15 FINAL INSTALLATION 7. Remove one light pan screw (S) from one of the three brackets below the light pan (H) and save. Loosen but do not remove the other two screws on the other two brackets. 8. Connect the 9-pin connector from the fitter plate (P) to the 9-pin connector from the light kit (Q).
  • Page 16 FINAL INSTALLATION 10. Install the bulbs (V) into the sockets on the light kit (Q). Remove the finial (U) and finial cap (T). 11. Lift the glass globe (I) over the threaded rod on light kit (Q). Lift the finial cap (T) up until it is flush with the glass bowl (I) and secure with the finial (U).
  • Page 17 FINAL INSTALLATION 13. Attach the pull chain extensions (DD) or custom pull chain extensions (not included) to the fan and light pull chains. Hardware Used Pull Chain Extension 14. Turn on power supply to the fan. Assembly is complete.

  • Page 18: Operating Instructions

    OPERATING INSTRUCTIONS 1. Using a ceiling fan will allow you to raise your thermostat setting in the summer and lower your thermostat setting in the winter without feeling a difference in your comfort. Note: Wait for the fan to stop before moving the reverse switch.

  • Page 19: Care And Maintenance

    CARE AND MAINTENANCE At least twice each year, tighten all screws on the fan. Clean the motor housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean the blades with a lint-free cloth. Bulb Replacement: Use 40-watt max. E26-base LED, CFL or incandescent bulbs. Halogen bulbs are not recommended for this item.
  • Page 20 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1. The blades are loose. 1. Check and tighten all screws that hold the fan blades to the blade arms and the motor. 2. There is a cracked blade. 2. Replace the cracked blade. 3.

  • Page 21: Limited Lifetime Warranty

    LIMITED LIFETIME WARRANTY The manufacturer warrants this fan to be free from defects in workmanship and materials present at time of shipment from the factory for a lifetime from the date of purchase by the original purchaser. The retailer also warrants that all other fan parts, excluding any glass or plastic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.

  • Page 22: Replacement Parts List

    REPLACEMENT PARTS LIST For replacement parts, call the customer service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Sunday. 1461048 1024423 2758997 PART DESCRIPTION PART # PART # PART # Downrod 4L000011310 4L000009320 4L000013850 Mounting Bracket 4L000011290 4L000010430 4L000013860 Canopy...

This manual is also suitable for:

Merrimack ii 42073Merrimack ii 42241102442314610482758997

Table of Contents

Save PDF