R-Series Conversion Assemblies - Toro Lynx Manual

R Series
C o n v e r s i o n A s s e m b l i e s
Features
• Trajectory adjustment of the main nozzle for radius
reduction and obstacle avoidance
• 24 positions from 7-30 degrees in 1 degree increments
– 855RB
• 2 positions 25 or 15 degrees - DT54RB & DT55RB
• Adjustable part/full circle or full circle only models available
• Adjustable part circle from 40-330 degrees and true full
circle - 855RB & DT55RB
• Full circle only - DT54RB
• Ratcheting riser allows riser positioning without riser
removal
• 4 main nozzle combinations included provides a wide
range of radius and flow capabilities
• Largest and most flexible nozzle offering
• Radius reduction screw for radius refinement
• All nozzles threaded in from the front with no disassembly
required
• Back nozzle capable (855RB & DT55RB only)
• Two additional front nozzle positions (DT54RB only)
• Riser pull up feature simplifies servicing
• Nozzle base clutching (855RB & DT55RB only) allows
nozzle base movement by hand
• Effluent identifier included:
• YARDMARKYEL (yellow numbers)
• YARDMARKLAV (lavender numbers for effluent
applications)
• Yardage marker capable
• 8,26cm (3.25") pop up clears tall grasses
Specifications
• Operating pressure range: 4,1 6,9 Bar (60-100 psi)
• Maximum pressure rating: 10,3 Bar (150 psi)
Model Number
855RB-5154
855RB-5558
DT55RB-5154
DT55RB-5558
DT54RB-5154
DT54RB-5558
Model Number
SPIKEGUARD-RB
DCLATCH-RB
Toro® has designed and manufactured this product to fit within a sprinkler housing made by Rain Bird® Corporation,
but Toro's product is not manufactured by or affiliated with Rain Bird. Rain Bird is a registered trademark of Rain Bird Corporation.
Adds 1" of
pop-up height
Specifying Information—R Series Conversion Assemblies
R Series Conversion with 855 riser assembly, nozzle set #51 - #54
R Series Conversion with 855 riser assembly, nozzle set #55 - #58
R Series Conversion with DT55 riser assembly, nozzle set #51 - #54
R Series Conversion with DT55 riser assembly, nozzle set #55 - #58
R Series Conversion with DT54 riser assembly, nozzle set #51 - #54
R Series Conversion with DT54 riser assembly, nozzle set #55 - #58
Specifying Information—R Series Solenoid Adaptors
Toro solenoid adapter with Spike Guard™ solenoid for Rain Bird Eagle 700, 900 or 1100 Series sprinklers
Toro solenoid adapter with DC Latching solenoid for Rain Bird Eagle 700, 900 or 1100 Series sprinklers
855RB
R-Series Solenoid Adapters
The New Toro solenoid adapters allow you to easily and
economically upgrade your Rain Bird® Eagle 700, 900 and
1100 Series sprinklers with the Toro Spike Guard and DC
Latching solenoids.
SPIKEGUARD-RB
Features
SPIKEGUARD-RB
• 20,000 volt surge protection (3 times what Rain Bird's
standard solenoid provides)
• Uses half the amperage of standard Rain Bird solenoid; Run
more heads simultaneously (if control system and available
water allow) and provides improved performance in low
voltage situations
DCLATCH-RB
• Sometimes the cost of a complete system upgrade can be a
bit overwhelming. This adapter allows you to manage that
cost better by maintaining your existing sprinkler bodies
and upgrading just the controls.
• Compatible with Toro's GDC system this solenoid adapter
allows a more economical solution when considering a
control system upgrade
• Solenoids are 100% compatible with all Toro sprinklers so
when it's time to upgrade the sprinklers you're already part
way there.
Description
Description
DT55RB DT54RB
DCLATCH-RB
31