Easy-Wire Software; Installation - Cirris CR User Manual

6. Easy-Wire Software

The Easy-Wire software controls the CR test system, provides the user interface for testing operations, and includes
the test program editor in which test programs are created and revised. The contents of the Connector Registry, test
programs and test results are all stored in the Easy-Wire database. The database can be located on the hard drive of
the test station PC-controller, the typical configuration for stand-alone stations, or the database can be located on a
network drive and shared with other Easy-Wire test stations using the Cirris Server Software.

Installation

6.1
1. The Easy-Wire Station Software installation file can be downloaded for the Cirris web site at
cirris.com.
2. If upgrading an existing Easy-Wire installation, back up the database before proceeding. Instructions for the back-
up process can be found at
3. Exit all open applications.
4. Navigate to the location of the installation file and open the
application to begin the installation.
5. Continue through the installation by clicking Next.
www.backup.easy-wire.com
Easy-Wire Software
or in the Easy-Wire Help.
www.downloads.
11