Timer Recording With Vcr Plus+ System - Sharp DV-HR300U Operation Manual

Timer Recording with
®
VCR Plus+ System
DVD-RW DVD-RW
HDD DVD-R
VR MODE VIDEO MODE
The operation method is the same for both
HDD and DVD.
• The VCR Plus+ ® System allows you to
program your Recorder for timer recording
simply by inputting the PlusCode number.
• The PlusCode numbers are listed in most
newspapers, television guides, and local
CATV listings. Simply by inputting this
PlusCode number, you can program your
Recorder for timer recording, eliminating
the need to input program start time, stop
time, channel, date and other information
usually necessary for timer recording.
• Up to 32 timer programs can be stored.
(This includes Easy Recording Guide,
Favorite Program, Timer Dubbing, and
Timer Program.)
Preparation to Use VCR Plus+ System
1 Check that the clock is displaying the
correct time.
2 Preset the channels.
3 When you record SAP broadcast, set
"SAP SETTING" to "ON" (see page 98).
4 When recording from an external
equipment such as a CATV box or
satellite receiver, turn on the power of the
external equipment.
1
Press VCR PLUS+ (button) to
display the VCR Plus+ Setting
screen.
• If you press VCR PLUS+ (button)
when the clock has not been set, the
"CLOCK SETTING" screen will
appear.
2
Press Number buttons to enter
the PlusCode number.
VCR Plus+ system
PRESS NUM KEYS TO ENTER PlusCode No.
1 2 3 4 5 – –
SET ERASE
• Press ERASE if you make a mistake
in the Plus Code number. Or Press \ \ \ \ \ /
| | | | | to select "ERASE", then press SET/
ENTER. Each time you press the
button, one digit will be erased.
• Press VCR PLUS+ (button) to cancel
the entire number.
3
Press \ / | to select "SET", then
press SET/ENTER.
• The timer recording details such as
date, start time, end time, channel
and the recording disc will be
displayed.
4
1 1 1 1 1 Press \ / | to select the
2 2 2 2 2 Press ' / " to select the
• You cannot select "DVD" to record
• When recording a program on a
TIMER PROGRAM
SET THE TIMER RECORDING DATE, TIME, CHANNEL AND MEDIA.
12/25
• Press \ \ \ \ \ / | | | | | to select the item you
• If you complete timer recording
5
1 1 1 1 1 Press \ / | to select "REC.
2 2 2 2 2 Press ' / " to select the
• If there is not enough empty space
When "MANUAL SETTING (MN)" is
selected:
1 / 2 5 2 SAT 1 : 0 8 2 AM
• Select the recording mode with \ \ \ \ \ / | | | | | , then
press SET/ENTER. (The recording mode
can be selected from 32 levels.)
– –
6
Confirm the setting of timer
program, press \ to select
"COMPLETE", then press SET/
ENTER.
• "TIMER PROGRAM LIST" screen is
• The TIMER indicator on the front of
• Select "ADVANCED" to input (or
Timer Recording
recording disc selection
column.
recording disc ("HDD" or
"DVD"), then press SET/
ENTER.
more than 6 hours.
channel for the first time, be sure to
enter the correct channel number in
step 4 , otherwise the PlusCode
number will not be successfully
decoded.
1 / 2 5 2 SAT 1
[SAT] 10 : 45 AM – 11 : 30 AM AIR/CATV CH
– – – TIMER PROG INFO – – –
want to correct such as the start/stop
' ' ' ' / " " " to correct. " "
time, then press '
(For details refer to page 46.)
setting less than 3 minutes before it
starts, timer recording start time
column will stay as selected. Reset
the timer recording start time at least
3 minutes after the present time.
MODE", then press SET/
ENTER.
recording mode, then press
SET/ENTER.
(time), a message is displayed.
Select the recording mode again.
displayed.
the Recorder lights up and timer
programming is completed.
change) the title name of program,
etc. (For details refer to page 51.)
Continued on Next Page |||
: 0 8 2 AM
33 HDD
45