Basic Connection; Easy Connection - Sharp DV-HR300U Operation Manual

Dvd recorder with hard disc
Hide thumbs Also See for DV-HR300U:
Table of Contents

Advertisement

Basic Connection

Easy Connection

The following connection is the basic connection to watch or record TV programs.
To use a cable box or satellite receiver, see "CATV or Satellite Receiver Connec-
tions" on pages 24 and 25.
Important!
•Be sure to turn off and unplug from the AC outlet this Recorder and all
equipment before connecting the cables.
•This Recorder is equipped with copy protection technology. The playback
picture from this Recorder will not appear correctly on your TV when you
connect this Recorder to your TV via a VCR (or your VCR via this Recorder)
using video/audio cables.
TV
To video/audio
input jacks
Video/audio
cable
(supplied)
4
To antenna
input jack
VCR
The Recorder
To antenna/CATV
wall outlet
Antenna cable
(commercially available)
22
Coaxial cable
(commercially available)
3
To antenna
output jack
To antenna
input jack
Coaxial cable
2
(supplied)
To PASS
THROUGH
To IN FROM
1
ANTENNA
1
2
•If you connect this Recorder directly
3
To video/audio
input jacks
4
Video/audio
cable
(commercially
available)
5
•To connect using S-video or
To video/audio
output jacks
5
•When using this connection, set
After the connection
Plug in the power cords of the TV and
VCR. Then go to "EZ Set Up" (see
page 26).
To VIDEO/AUDIO
Output jacks
Connect the TV antenna
cable to the IN FROM
ANTENNA jack on the rear
of this Recorder.
Connect the PASS
THROUGH jack on the rear
of this Recorder to the
antenna input jack on your
VCR using the supplied
coaxial cable.
NOTE
to your TV, skip the next step.
Connect the antenna
output jack on your VCR to
antenna input jack on your
TV using a coaxial cable.
Connect the VIDEO/AUDIO
Output jacks on this Re-
corder to the video/audio
input jacks on your TV using
the supplied video/audio
cable.
Be sure that the colors of the
jacks and plugs match up when
connecting the cable.
NOTE
component cables, see "Using
Other Types of Video Output" on
page 23.
Connect the video/audio
output jacks on your VCR
to the video/audio input
jacks on your TV using a
video/audio cable.
Important!
"PROGRESSIVE OUT" to
"PROGRESSIVE SCAN OFF" (see
page 102).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-hr300

Table of Contents