Table of Contents
Advertisement
Image Adjustment
This function is to adjust the projected picture image and set the image
mode. For selection of image mode, select desired image mode among the
"Standard", "Real", "Cinema", "Image1", "Image2", Image3" and "Image4"
with the "Image Adjustment Mode"
popup button and then press the
Set button. The setting items are
switched automatically according to
selected input mode, computer or
video input. To adjust the controls,
press the + or - buttons to increase
or decrease the value, or enter the
value directly onto the text area of
the control and then press Set but-
ton. The adjustment items and
operation are listed below. The
value next to each control represent
the current control value and status.
The mode "Image1" to "Image4" can
be stored as your preferred image
mode through "Save Adjustment"
item located on lower part of the
page. Select an image number from
the popup menu button and then
press the Save button. To cancel
your change, press the Return but-
ton.
The "Original Mode" is to indicate which image mode are applied to the user preset
modes "Image1" to "Image4".
Adjustment items
Image adjustment mode Select image mode among the Standard, Real **, Cinema*, Image1
Adjustment items
Comment
Range of control value is as follows: Sharpness: 0 to 31, Gamma: 0 to 15, others: 0 to 63
Operation
to Image4 with popup button menu . Image1 to 4 are user preset
mode.
Contrast, Brightness, Sharpness*, Gamma, White Balance, Tint*,
Color*, Noise Reduction*, Progressive*
* Controls for video input, ** Controls for computer input
Type the comment in the text area and press the
Control the projector
Current set
value
Save
button.
PJ-Net Organizer
OWNER'S MANUAL
39
Advertisement
Table of Contents
