APPLIANCE TO RAIN OR MOISTURE. Provide appropriate space on the top, sides and rear of the Projector and Smoke Resistant Box for allowing air circulation and cooling the Projector. Minimum clearance must be maintained. If the Projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained.
APPENDIX ·················································································································11 MAINTENANCE ················································································································· 11 TROUBLESHOOTING········································································································ 11 DIMENSIONS SPECIFICATIONS • The Smoke Resistant Box protects the projector from dust and cigarette smoke by adopting a highly efficient filter. • Provide two powerful silent rotary fans, and cool down the Projector efficiently.
PART NAMES MOUNTING SCREWS (provided on each corner) (Screws are provided in the holes) FILTER COVER (AIR INTAKE VENTS) PART NAMES FILTER REAR CONNECTOR FRONT INDICATORS...
AIR INTAKE VENTS CAUTION:UNPLUG THE PROJECTOR FROM THE AC OUTLET WHEN INSTALLING THE SMOKE RESISTANT BOX. ATTACHING THE SMOKE RESISTANT BOX WHILE THE PROJECTOR IS CONNECTED TO ELECTRICITY MAY DAMAGE THE BOX OR CAUSE IT TO MALFUNCTION. PROCEDURE OF INSTALLATION...
Page 6
INSTALLATION Align the connector of the Projector with the connector pins of the Smoke Resistant Box. CAUTION:TAKE CARE NOT TO TOUCH THE CONNECTOR OR APPLY SHOCK THAT MAY DAMAGE THE CONNECTOR. Hold the Smoke Resistant Box parallel to the Projector and push it slowly towards the Projector.
* When the POWER indicator does not light and the WARNING FILTER indicator flashes, the filter is not attached to the Smoke Resistant Box. In this case, the READY indicator on the Projector does not light and the Projector can not be turned on.
When ordering the filter, give the following information to the dealer. • Replacement Filter type No. • Smoke Resistant Box type No. : POA-SR-140 CAUTION:WHEN REPLACING THE FILTER, TURN OFF THE PROJECTOR. Press the PUSH button on the filter cover.
Page 9
Open the filter cover and take out the used filter. FILTER COVER Install the new filter. CAUTION:USE ONLY REPLACEMENT FILTERS RECOMMENDED BY THE MANUFACTURER. THE USE OF OTHER FILTERS MAY CAUSE THE BOX TO MALFUNCTION OR ACCIDENT MAY RESULT. CAUTION:TAKE CARE NOT TO DAMA- GE THE FILTER DETECTION SWITCH LOCATED INSIDE THE BOX WHEN IN- SERTING THE FILTER.
※ "Option filter time" menu will not exist when Smoke Resistant Box is not attached on the projector. Reset the filter time according to the following procedures:(Only reset the filter time when changing the filter. The Smoke Resistant Box cannot be operated properly if it is reset other than filter change.) Check that the Smoke Resistant Box is properly attached to the projector.
• IF THE SMOKE RESISTANT BOX IS NOT USED LONG PERIOD OF THE TIME. Remove the Smoke Resistant Box from the Projector and store in safe place. • CARE AND CLEANING OF THE CABINET. Remove stains on the cabinet with a soft cloth. If the stain is particularly stubborn, use a cloth soaked in a heavily diluted mild detergent, and finish with a dry cloth.
Projector smoke proof and dustproof box Approximately 2.0m /min POWER, WARNING FILTER, WARNING to 95 to 35 ) (indoors) 6.5''x8.5"x18.1" (165mm x 216mm x 461mm) Approximately 7.5lbs (3.4Kg) QUANTITY QUANTITY QUANTITY Smoke Resistant Box 18.1'' (461mm) RIGHT SIDE CONTENTS CONTENTS CONTENTS SANYO Electric Co., Ltd...