Mitsubishi Electric MAC-587IF-E Installation Manual page 4

Contents
1. Safety precautions . .........................................................................................1
2. Product Introduction .......................................................................................5
3. Parts ...............................................................................................................5
4. Connecting the Wi-Fi interface .......................................................................6
5. Specifications .................................................................................................8
About Wi-Fi interface
This Wi-Fi interface, communicates the status information and controls the commands from the
MELCloud by connecting to an indoor unit.
● S ome indoor units are not compatible with the Wi-Fi interface. Make sure that the indoor unit is
compatible with the Wi-Fi interface before attempting to install the Wi-Fi interface.
1. Safety precautions
● Read all Safety Instructions before installa-
tion, setting up, or use of the Wi-Fi interface.
● This installation manual contains important
safety information. Be sure to comply with the
instructions.
[Precautions for installation]
(Improper handling may have serious consequences, including serious injury or death.)
■ Do not install the Wi-Fi interface by your-
self (user).
Improper installation may result in fire, electric
shock, injury due to fall of the Wi-Fi interface,
or water leaks. Consult the dealer from whom
you purchased the Wi-Fi interface or profes-
sional installer.
■ The Wi-Fi Interface should be securely
installed in accordance with this installa-
tion manual.
Improper installation may result in fire,
electric shock, or damage, or fall of the Wi-Fi
interface.
■ The Wi-Fi interface should be mounted in a
location that can support its weight.
If the Wi-Fi interface is installed in a loca-
tion that cannot support its weight, the Wi-Fi
interface could fall and cause damage.
■ Connect and fasten the electric wires
securely so external force on the wires will
not apply on the terminals.
Improper connection and mounting may result
in breakdown, heat generation, smoke genera-
tion, or fire.
■ Mitsubishi Electric's components or other
designated components must be used for
installation.
Improper component may result in fire, electric
shock, or damage/water leaks.
1
● After installing the Wi-Fi interface, provide this
installation manual for the user. Instruct users to
store it with their indoor unit instruction manual
in a safe location.
Warning
■ Electric work must be performed by
authorized personnel in accordance with
the local regulations and the instructions
detailed in the installation manual.
Inadequate circuit capacity or improper instal-
lation may result in electric shock or fire.
■ Do not connect the Wi-Fi interface to earth
inside the indoor unit.
■ Attach the electrical cover to the indoor
unit securely.
If the electrical cover of the indoor units is not
attached securely, it could result in a fire or an
electric shock due to dust, water, etc.
■ When installing the Wi-Fi interface, use
appropriate protective equipment and
tools for safety.
Failure to do so could cause injury.
■ Turn off the breaker or unplug the power
supply plug of the indoor unit when con-
necting the Wi-Fi interface.
Failure to do so could cause electric shock.
■ Make sure to connect the connecter of the
Wi-Fi interface to the printed circuit board
of the indoor unit properly.
Incomplete connecting or mounting may
result in broken wire, heat generation, smoke
generation, or fire.