Mitsubishi Electric MAC-587IF-E Installation Manual page 11

<ATW indoor unit>
Cylinder unit
Mounting
cord clamp 4
Screw 3
Mount in the same procedure for air conditioner. Please refer to "When mounting on the wall" on
page 6.
(2) Turn on the breaker of the air conditioner or the ATW unit and check
that the LED indication of the Wi-Fi interface enters the initial state
shown on right.
Setting up
Refer to SETUP QUICK REFERENCE GUIDE (Included in same package) and SETUP
MANUAL to connect to a Router for setting up.
For SETUP MANUAL, please go to the website below.
http://www.mitsubishielectric.com/ldg/ibim/
For MELCloud User Manual, please go to the website below.
https://www.melcloud.com/Support
5. Specifications
Input Voltage
Power consumption
Size H×W×D (mm)
Weight (g)
Transmitter power level (MAX) 20 dBm @IEEE 802.11b
RF channel
Radio protocol
Encryption
Authentication
Software Ver
Length of cable (mm)
For Declaration of Conformity, please go to the website below.
http://www.mitsubishielectric.com/ldg/ibim/
Hydrobox
Screw 3
Mounting
cord clamp 4
DC12.7 V (from indoor unit)
MAX 2 W
73.5×41.5×18.5
95 (including cable)
1ch ~ 13ch (2412~2472 MHz)
IEEE 802.11b/g/n (20)
AES
WPA2-PSK
XX.00
2,040
Connecting to Cylinder unit
150 150
(Unit: mm)
Connecting to Hydrobox
150 150
Initial State
ERR OFF
NET OFF
MODE OFF
UNIT Flashing
8