Note: Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating
system first. For more information, see the Windows help system.
Front fan
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove these parts in order, if any:
• "Computer cover" on page 53
• "Front bezel" on page 55
2. Disconnect the front fan cable from the front fan connector on the system board.
Note: The front fan is attached to the chassis by four rubber mounts. Break or cut the rubber mounts and
gently pull the front fan out of the chassis.
Replacement procedure
82
P360 Tower Hardware Maintenance Manual