Flexible I/O board
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove these parts in order, if any:
• "Computer cover" on page 53
• "E-lock" on page 92
• "Rear fan" on page 83
• Type-2 heat sink and fan assembly, if any. See "Heat-sink-and-fan assembly" on page 84
Removal steps
Internal speaker
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove these parts in order, if any:
• "Computer cover" on page 53
• "Optical drive" on page 54
• "Front bezel" on page 55
• "Optical drive cage" on page 74
2. Disconnect the internal speaker cable from the system board.
.
Chapter 7
Hardware removal and installation
95