GE ARITECH FP400 Series Installation Manual page 6

1. Mains connector (110 VAC / 230
2. Zones connectors (from 2 to 4, or 8,
3. Output connectors: Auxiliary 24 VDC,
4. 24V Resetable Output - 0.1 A fuse
5. Sounder output #1 - 0.3 A fuse
6. Auxiliary 24 VDC Output - 0.3 A fuse
7. Sounder output #2 - 0.3 A fuse
Independent of the number of zones, all FP400 panels have the following common
functionality:
1.4.1 Inputs/Outputs
Figure 3: Inputs/outputs of FP400 fire panels
RFL
+
+ +
Z1 Z2 Z3
1.
2.
3.
4.
6
VAC)
12 or 16, depending on fire panel
model)
Fire and Fault Relays and Sounders
Enable / Disable per zone.
Test per zone.
Activation / Silencing of sounders.
Programming of sounder delays.
Supervision of main power, batteries and outputs.
Differentiation of manual call point and/or detector alarm signal within the same zone.
Remote reset optional operating mode.
Active end-of-line optional operating mode.
Relay master modules (optional)
Sounder master modules (optional)
1
Zones input
Class change input.
Auxiliary 24 VDC output.
General alarm and fault relay (potential
free)
8. Configuration DIP switch
9. 5 A battery fuse
10. Transformer connector
11. Front panel connector
12. Master module output connector
13. 24 V battery connector
3
2
4
+
+ +
C NO NC
Z1
24 VDC resetable output.
5.
Two supervised 24 VDC sounder
6.
outputs, with programmable delay.
FP400 Series Installation Manual
5
RFL
6
RFL
+ + +