Table of Contents
Related Manuals for Samsung SNC-L200(W)
Summary of Contents for Samsung SNC-L200(W)
- Page 1 Safety instructions and precautions are designed to protect users and prevent any property damage. Please read and observe these instructions thoroughly before using the Netcam. Netcam(W) SNC-L200(W) User’s manual AB68-000524B(01)
- Page 2 Netcam(W)_SNC-L200(W) Safety Precautions This symbol indicates high voltage is CAUTION presentinside. It is dangerous to make RISK OF ELECTRIC any kind of contact with any inside part SHOCK DO NOT OPEN of this product. CAUTION : This symbol alerts you that important TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR literature concerning operation and...
- Page 3 Netcam(W)_SNC-L200(W) Features The Netcam can be installed in any place you want at domestic, business or industrial premises, and provides real-time security moving images over the Internet, allowing remote controlling for security and monitoring. The NetcamW is a wireless network camera adopting wireless network technology, which allows users to access a security camera without LAN cable connection.
-
Page 4: Before Using This Manual
Netcam(W)_SNC-L200(W) Features Web-browser Monitoring You can view video of the Netcam(W) over an Internet Web browser, so you can view video not only in the local network environment but also over an external Internet network. Auto Local IP Set Provides easy-to-use installation functions for users who are unfamiliar with settings of an environment. -
Page 5: Table Of Contents
Netcam(W)_SNC-L200(W) Contents Preparations Single Use Safety Precautions ...10 Installing the IP Router of Wireless Router ...23 Installing the IP Router of Wireless Router Title of Each Component ...12 - Setting the Port Forwarding...23 - List of Components ...12 Installing the SNC Installer...24 - Passive Infrared (PIR)Sensor ...14 Searching the Connected Netcam(W)...26 - Flash ...14... -
Page 6: Safety Precautions
Netcam(W)_SNC-L200(W) Safety Precautions Strict compliance with the safety instructions is required for protection and ensured safety of users and prevention of property damage. Warning Failing to comply with the instructions may result in injury or even fatality. Power Do not use more than one plug Do not bend power cords and do not at the same time. -
Page 7: Title Of Each Component
SNC-L200 : - It turns on when it is connected to the power source. List of Components You can download the latest version of software from the Samsung Electronics Web site (http://www.samsung.com). Netcam(W) User ’s Manual Installation... -
Page 8: Passive Infrared (Pir)Sensor
Netcam(W)_SNC-L200(W) Title of Each Component Passive Infrared (PIR)Sensor Detects and records motion of a human or an animal by using an infrared ray. - Selects perform or cancel by using the PIR Sensor Button of Smart/Multi Viewer. - Flash can be turned on in link with the PIR Sensor. Range of detection left and right Range of detection up and down Distance and Range... -
Page 9: Connection
Connection Please read power, network connection and installation instructions carefully before connecting to the Internet. Internet Connection You can remotely monitor moving images in real time by connecting the camera to the Internet and setting up the network environment. External PC Direct Cable IP Router... -
Page 10: Power Connection
Netcam(W)_SNC-L200(W) Power Connection Connect power by using the power adapter and cord provided as accessories of this product. Power LED Power Adapter Back of Main Body ”»ˆ… ‚Ø Connect the power adapter to the power connector of the Netcam(W). Connect the jack of the power cord to the power adapter. Insert the power plug to the wall outlet. -
Page 11: Installing The Camera
Netcam(W)_SNC-L200(W) Installing the Camera You can install the camera on the wall, in standing position or on the tripod after deciding the place and height of installation. Installing the camera on the wall (concrete or cemented wall) Attach the fixing label on the wall. Make two holes by using an electric drill. -
Page 12: Single Use
Single Use Recommended System Specifications - Computer : Pentium 4/1.5GHz or higher (Pentium 4/1GHz or higher at minimum) - Operating System : Windows 2000/XP - Ram : Memory : 256MB or higher - Video : Memory : 128MB or higher - Resolution : 1024 X 768 or higher - Web Browser : Internet Explorer 6.0 or higher - Video transmission may slow down depending on PC performance or network conditions. -
Page 13: Installing The Snc Installer
Netcam(W)_SNC-L200(W) Installing the SNC Installer Search and set up the Netcam(W) connected to the hub or the IP router. Insert the installation CD into the CD-ROM driver of the PC. Double click “SNC Installer.exe.” Click the “Next ”Button. Click Click the “Install ”Button. Click Netcam(W)_SNC-L200(W) Click the “Finish ”Button. -
Page 14: Searching The Connected Netcam(W)
Netcam(W)_SNC-L200(W) Searching the Connected Netcam(W) Used to search an IP router (router or wireless router)connected with the Netcam(W) or a Netcam(W) directly connected with the Run the program by double-clicking the SNC Installer icon. Or you can click [Start ]-[All Programs ]-[SNC Installer ]-[SNC Installer ]. - If a warning screen appears, click the ‘block clear’... -
Page 15: Setting The Network
Netcam(W)_SNC-L200(W) Setting the Network You can set a variety of network settings such as IP address and UPnP by using the SNC Installer program. You can choose between <Auto Local Set>and <Manual Set>. Auto Setting the Network The SNC Installer searches and automatically allocates available IP and Subnet Masks over the user network by using the Auto Local Set. -
Page 16: Manually Setting The Network
Netcam(W)_SNC-L200(W) Setting the Network Manually Setting the Network When connecting the Netcam(W) by using the Manual Set, you must enter the IP and the Subnet Mask since they are allocated automatically. Press the Manual Set Button on the bottom of the SNC Installer screen. - Page 17 Netcam(W)_SNC-L200(W) Setting the Network You can set a variety of network settings such as IP address and UPnP by using the SNC Installer program. You can choose between <Auto Local Set>and <Manual Set>. Manual Set Screen 1. Server Name: Set the name of the Netcam(W). You can enter up to 20 letters (alphabet and Arabian numbers).
-
Page 18: Port Forwarding
Netcam(W)_SNC-L200(W) Setting the Network Port Forwarding Port Forwarding assigns port numbers to each network device (including the Netcam(W) and PC)connected to the local network comprising of IP routers (or wireless routers), in order to connect the Global IP to the Private IP. IP Router Click the Internet Set ((UPnP)Button on the bottom of the SNC Installer screen. - Page 19 Netcam(W)_SNC-L200(W) Setting the Network The results of port forwarding appear in the UPnP Portmapping Result screen. - Access the address displayed in the - Check the URL or the external Search the set values again by clicking the Search Button on the bottom of the SNC Installer screen.
-
Page 20: Access To The Netcam(W) Website
Netcam(W)_SNC-L200(W) Access to the Netcam(W) Website You can check real-time moving images anywhere anytime via the Smart Viewer by accessing the Netcam(W) Website. Access from a Local Network PC You can access the Netcam(W) Website from the connected Netcam(W) via the IP router (or wireless router). -
Page 21: Installing The Activex Control
Netcam(W)_SNC-L200(W) Access to the Netcam(W) Website For Static IP Users Run Internet Explorer. Enter “http: //Private_IP address: port number” in the URL, and press the Enter Button on the keyboard. - The Smart Viewer Screen appears. - Ex)http://168.219.13.197:8080 Enter the user name and password, and click the “OK” button. - Enter the new password when you have changed the user password from <Smart>to <Admin. -
Page 22: For Windows Xp Service Pack 2
Netcam(W)_SNC-L200(W) Installing the ActiveX Control A security warning window may appear when you access the Netcam(W) Website for the first time. In this case, you must install the Active Control program to view video from the Smart Viewer. For Windows XP Service Pack 2 Click the Installation Message when the following security warning window appears. -
Page 23: Using The Smart Viewer
Netcam(W)_SNC-L200(W) Using the Smart Viewer You can use a variety of features such as video monitoring, record, capture and playback with the Smart Viewer. Smart Viewer Screen 1. ActiveX Control Download: Click when installing the ActiveX Control program manually. 2. Smart Viewer Tab: You can video-monitor. 3. -
Page 24: Preset
Netcam(W)_SNC-L200(W) Using the Smart Viewer Preset To Set Preset You can store up to 8 lens directions,thereby restoring the lens to the originally stored position after movement. Select the Preset Number ( ) to be set. Move the lens to the desired store position by using the lens direction button. Click the Preset Store Button ( Repeat steps 1 to 3 if you want to store another number. -
Page 25: Record Moving Images
Netcam(W)_SNC-L200(W) Using the Smart Viewer Record Moving Images You can record and store images seen in the Smart Viewer. Click the Record Button. - ‘Rec’ is displayed on the screen,and recording begins. Click the Stop Record Button to stop recording. - Record is stopped. -
Page 26: Stop Recorded Files
Netcam(W)_SNC-L200(W) Using the Simple Player Stop Recorded Files Click the Stop Button on the Simple player screen. When the number of file appears in .fjp, it means it is a moving Note image file.When it appears in .jpg, it is a capture file. Capture Playback Images Click the Pause Button ( ) when the image you want to capture... -
Page 27: Setting The Smart Viewer
Netcam(W)_SNC-L200(W) Using the Simple Player Simple Player Screen Menu Bar 1. Open Button: Open files to be played back. 2. Playback Button: Play back files. Reverse Playback Button: Reverse playback files. Pause Button: Stop playback for seconds. Stop Button: Stop playback. (the screen appears at the beginning of the playback file) Previous Image Button: View the previous images cut by cut in Pause mode. -
Page 28: System Configuration
Netcam(W)_SNC-L200(W) System Configuration < System Setting Sub Menu > - System Information: Set system information. - Admin.Password: Change the password of the administrator. - Access Limitation: Control the access of the user. - User Registration: Add, modify and delete the ID and password of the user. - Video: Set the quality and resolution of video images. - Page 29 Netcam(W)_SNC-L200(W) System Configuration User Registration Register, modify and delete the ID and password of the general user. < How to Register User ID > Click the Add by clicking. Enter the User ID. Enter a User Password. Enter the password again for confirmation.
-
Page 30: Network Configuration
SMTP server address: Used to send E-mail to the address on SMTP (Simple Mail Transfer Protocol)Server. Enter the SMTP server address and your personal e-mail address (only the part after ‘@’). ex) smtp.samsung.com Authentication Login: Select the Enable to use the log-in screen. It is recommended to select the Enable. - Page 31 Netcam(W)_SNC-L200(W) Network Configuration Network Configuration Set the Static IP or the network of the cable modem. Talk with the network administrator, and enter correct values for items. Static IP IP Address: Enter the Static IP address. Netmask: Enter the Subnet Mask. (typically 255.255.255.0.) DNSI/DNS2: Enter the DNS Server address.
- Page 32 Netcam(W) from external Internet. Network Port Configuration Port number used to access the Netcam(W) over the Internet. Note For the SNC-L200(W)icon of “My Network Places,”Windows XP Service Pack 2 must be installed. And the “UPnP Framework ”in the exception tab of “Controller-Windows Firewall ”must...
- Page 33 Netcam(W)_SNC-L200(W) Network Configuration Network Status Notification Automatically informs the user of a cable modem or ADSL of a new IP address via mail when the link IP address changes. Mail Notification: Decide whether to use this service. When selecting Enable, you can use the Mail Notification function.
-
Page 34: Utilities
Netcam(W)_SNC-L200(W) Utilities < Utility Sub Menu > - Save Configuration: Store the settings in flash memory. - Reboot: Re-boot the system. - Factory Default: Restore the settings to factory default. - System Update: Update the system. Save Configuration Store the settings in the memory of Netcam(W),and save them when power is turned off or the system is re-booted. - Page 35 Netcam(W)_SNC-L200(W) Utilities Normal Update Click the OK Button. Click Click the Yes or NO Button. Click the Search Button. Click Netcam(W)_SNC-L200(W) Click the Open Button after selecting a system file to update. Click Click the Next Button. Click Click the Next Button. Click...
- Page 36 Note access the Internet again after 1 minute. You can download the latest version of software from the Samsung Electronics Website (http://www.samsung.com). - You have to separate wired from wireless models before updating. File name of a wired model: system - l - * , web- l - * / File name of a wireless model:...
-
Page 37: Access To Netcam(W) Via A Cell Phone (Usa Only)
(as of August, 2005). * Cingular * Sprint * T-Mobile - Connection to or control over SNC-L200(W)may not work, depending on the communication service provider, mobile phone’s model or firmware version, area and/or wireless network operator, or for other reasons. -
Page 38: Multi Use
Multi Use Recommended System Specifications - Computer: Pentium 4/2.0 GHz or higher (8 channels) Pentium 4/2.4GHz or higher (16 channels) - Operating System: Windows 2000/XP (Service Pack installation is recommended) - Ram Memory: 512MB or higher - Video Memory: 64MB or higher - Resolution: 1024 X 768 - Web Browse: Internet Explorer 6.0 or higher Installing the MultiViewer Program... -
Page 39: Registering The Netcam(W)
Netcam(W)_SNC-L200(W) Registering the Netcam(W) You can register up to Netcam(W) 16 units. Registering the Netcam(W) Double-click the “Network Camera MultiViewer” icon on the Background Screen. Or Click [Start ] -[All Programs ] - [Network Camera MultiViewer ] - [Network Camera MultiViewer ] to start. -
Page 40: Connecting The Netcam(W)
Netcam(W)_SNC-L200(W) Connecting the Netcam(W) You must first connect the registered Netcam(W) to view video from the MultiViewer. Double-click the Network Camera MultiViewer icon on the Background Screen. Or Click [ Start ]-[ All Programs ]-[ Network Camera MultiViewer ]- [ Network Camera MultiViewer ] to start. Select the Netcam(W) to be connected from the Netcam(W) list. -
Page 41: Using The Multiviewer
Netcam(W)_SNC-L200(W) Using the MultiViewer You can use multi units of Netcam(W) connected through the MultiViewer for monitoring, recording, capturing and playback. MultiViewer Screen 20 19 18 MultiViewer Mode Tab: Monitor videos from multi units of the Netcam(W). Multi Playback Mode Tab: Play back recorded and captured images. Date Indicator: Indicates the day/month/year/time of the current monitoring. -
Page 42: View Multi Channel
Netcam(W)_SNC-L200(W) Using the MultiViewer View Multi Channel View 1 Channel Click the 1-Channel Button. - Video is displayed in original size on a single screen. - Press the One Channel Button again to display the entire size of the MultiViewer. View 4 Channels Click the 4-Channel Button. -
Page 43: Sequence View
Netcam(W)_SNC-L200(W) Using the MultiViewer Sequence View Video of the connected Netcam(W) is displayed in sequence automatically. Click the Sequence View Button. - 1 Channel:Video is displayed by one channel in sequence. - 4 Channels:Four screens are displayed at the same time,and switched up to four pages in sequence. -
Page 44: Recording Motion
Netcam(W)_SNC-L200(W) Using the MultiViewer Recording Motion Set the motion area in the 16-split video, and automatically record video when a motion is detected in the set area. This function is applied to only one channel. Click the video you want to motion-record on the MultiViewer Screen. -
Page 45: Capturing Video
Netcam(W)_SNC-L200(W) Using the MultiViewer Capturing Video You can capture the images you want as JPEG files anytime during monitoring. Click the video you want on the MultiViewer Screen. Click the Capture Button( - Video is captured as a JPEG file. - Captured files are stored in the C:WProgram FilesWNetwork Camera MultiviewerWVideo Files folder. -
Page 46: Playing Back The Multiviewer
Netcam(W)_SNC-L200(W) Playing Back the MultiViewer MultiViewer Playback Screen Small Screen View Button: Play back images in 160X120 resolution. Normal Screen View Button: Play back images in 320X240 resolution. Large Screen View Button: Play back images in 640X480 resolution. Viewer Screen View Button: Play back images in MultiViewer Screen size. Full Screen View Button: Play back images in full monitor screen. -
Page 47: Record File Playback
Netcam(W)_SNC-L200(W) Playing Back the MultiViewer Record File Playback You can check event log information in the MultiViewer, as well as play back, capture and print recorded files. Click the Mode icon on the MultiViewer Screen. - The Multi Playback screen appears. -
Page 48: Setting The Multiviewer
Netcam(W)_SNC-L200(W) Setting the MultiViewer Event Log Screen Time: Display the data and time of creating the log file. Target: Display information on the Netcam(W) server. IP Address: Display the Netcam(W) IP address. Mac address: Display the Netcam(W) Mac address. (Displayed on the label on the top of the main body) Event Mode: Display log information based on status. -
Page 49: Setting The Scheduled Recording
Netcam(W)_SNC-L200(W) Setting the MultiViewer Setting the Scheduled Recording You can record the Netcam(W) on the specific day and at the specific time you want. Select the Netcam((W)to scheduled-record from the “Schedule” of the “Image Recording.” Click the Browser Button. - The Scheduled Recording Screen appears. -
Page 50: Product Specifications
Video WEBcom_SNC-L200 Product Specifications Communication mode IEEE 802.11b Frequency Range 2,412MHz ~ 2,462MHz(USA) / 2,412MHz ~ 2,472MHz(EU) Channel 1 ~ 11(USA) / 1 ~ 13(EU) Wireless- Security WEP (HEX/ASCII, 64/128bit) NetcamW Modulation Type System BPSK, QPSK, CCK Oscillator Form Image Compression JPEG Video Compression MJPEG...