Siemens Hicom 150 H Service Manual page 42

For internal use only
5.2 SW upgrade
Upgrading from HiPath HG 1500 is performed via APS transfer.
5.3 Firmware Download
Firmware Download is only available at the developer level of the Assistant. This fea-
ture is used to upgrade the firmware of a board to a new version. Such a firmware
upgrade should only be performed if there are valid reasons (since the operation is
comparable to a BIOS update on the PC)
Select the APS file with the firmware to be transferred (File Open dialog)
●
Assistant I checks as to whether the software of the selected HiPath HG 1500
●
system supports a firmware transfer. If this is not the case, the following error
message will be displayed:
A31003-K5020-S100-6-7620
Service Manual
lan2de.c05
Additional information
Firmware Download
5-3