Interfaces To The Lan; Table 2-12 V.24 Socket Assignment (Hxgm2) - Siemens Hicom 150 H Service Manual

lan2de.c02
Installation
HiPath HG 1500 boards
Table 2-12
Pin Signal
(7) GND
Note
A SLIP connection is required for Assistant administration of Xpress @LAN/HG 1500.
However, a SLIP connection is not possible for the Loader.

2.1.3 Interfaces to the LAN

The physical configuration of the LAN interface is predefined by the IEEE 802 stan-
dard. The interface conforms to international standards for electrical safety and elec-
tromagnetic compatibility (EMC). The electrically isolated coupling of the board at the
LAN is performed by the send and receive transmitter. The maximum transmission
speed of this "baseband" transmission technology is 100 MBit/s; the "Manchester"
signaling code is used.
The HiPath HG 1500 boards HXGS and HXGM are provided with a 10/100MB Au-
tosense LAN port.
The HiPath HG 1500 boards HXGS2 and HXGM2 with a 2nd LAN interface are also
provided with a 10 BT LAN port, for example for routing via DSL.
2-12
V.24 socket assignment (HXGM2)
I/O Function
For internal use only
A31003-K5020-S100-6-7620
Service Manual