Advertisement
G0171 19
1. Hex-head flange screw
(5/16–18 inch)
2. Light and bracket
assembly
3. Install the license plate bracket assembly to the center
boom. Use two hex-head flange screws (5/16-18
inch) and two lock nuts (5/16 inch) to secure the
assembly to the boom (Figure 1).
4
G017120
1. License plate bracket
assembly
2. Hex-head flange screw
(5/16–18 inch)
4
3
2
Figure 2
3. Mount bracket
4. Lock nut (5/16 inch)
(10-24)
1
2
3
Figure 3
3. Center boom
4. Lock nut (5/16 inch)
(10-24)
2
1
Connecting to the Wire
Harness
No Parts Required
Procedure
Locate the bullet nose connectors on the Road Light
harness labeled license light. Connect those to the back
of the license plate lamp.
2
Advertisement
