Toro GreensPro 1200 Greens Roller Installation Instructions

Oil Drain Kit
GreensPro
Model No. 111-7118
This product contains a chemical or chemicals known to the State of California to
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Oil-drain adapter
Oil-drain valve
Oil-drain hose
Installing the Oil Drain Kit
1. Raise the machine onto the transport wheels.
2. Tilt the machine so that the end of the machine with
the engine is closer to the ground, and support the
other end to hold it in this position.
3. Place a suitable container under the oil-drain plug.
4. Remove the oil-drain plug, and allow the oil to drain
Figure 1.
1
1. Oil-drain plug
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
™ 1200 Greens Roller
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
G025535
Figure 1
Register at www.Toro.com.
WARNING
CALIFORNIA
Qty.
1
1 Install the oil drain kit.
1
5. Install the oil-drain adapter into the oil-drain hole
(Figure 2).
1
1. Oil-drain hose
2. Oil-drain valve
6. Install the oil-drain valve into the oil-drain adapter
(Figure 2).
7. Ensure that the oil-drain valve is closed.
Note: To close the oil-drain valve, push it in and turn
it clockwise (Figure 3).
Form No. 3378-983 Rev A
Installation Instructions
Use
Figure 2
3. Oil-drain adapter
Original Instructions (EN) All Rights Reserved *3378-983* A
Printed in the UK
G025536