Motorola L6Q Installation Manual page 11

Chapter 2
Getting Started
2.1
Camera Installation Preparation
Before heading out to an installation site, complete the steps in the Getting Started section to prepare
the L6Q camera ahead of site visits. Review the following list of items and ensure everything needed is
on hand before beginning installation.
Table 3: L6Q Installation Package Items
L6Q Package
Kit Contents
Optional Add-Ons
NOTE: The L6Q kit may come with
these optional add-on items selected
during the ordering process.
Additional Required Items
NOTE: Ensure you gathered the fol-
lowing additional required items not
included in the L6Q kit.
Optional Items
NOTE: These items may be optional
depending on the conditions of the in-
stallation site:
Items
L6Q Camera Mounting Bracket
Camera Battery Tray (with batteries)
USB-C Cable (with USB-A Adapter)
Hex Key Tool (for band ties)
Pin & Torx Tool (for camera doors)
Metal Band Ties (2x)
Lag Bolts (2x) (for optional mounting to a sur-
face)
Reusable Zip Ties (2x)
Rapid Deployment Carry Case
AC Power Cable and Adapter
DC Power Cable
Solar Panel Kit
Apple iOS/Google Android Mobile Phone
Activated SIM Card (Verizon, AT&T, FirstNet,
T-Mobile)
Vigilant PlateSearch Agency Manager Account
or Vigilant Client Portal Site Manager Account
Wire Snips (for wire trimming and stripping)
MicroSD Card (for extra storage during the con-
nection loss)
Power Drill (if mounting on surface)
Ladder (for secure installations above pedes-
trian height)
MN008660A01-AA
Getting Started
11