Maintenance
Note: Determine the left and right sides of the machine
from the normal operating position.
Disassembling the Reel
Disassemble the reel whenever you need to change a blade
or replace the reel bearings.
Important: Ensure that the 2 shaft retainers and spacer
are in place before installing the bearing on the reel
(Figure
5). Torque the insert nuts to 136 N-m (100 ft-lb).
1. Left-hand threaded insert
nut
2. Bearing
3. Seal
Figure 5
4. Spacer
5. Slot in shaft
6. Shaft retainer (install these
first)
8