Riden RD6024 Instructions Manual page 14

声明：本说明书著作权归杭州睿登科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
https://www.youtube.com/watch?v=ml15mX4u5bE
Press + to enter the system setting menu, the icon in Red shows the
menu being chosen, press
is the option being chosen, you can rotate the encoder potentiometer to change
setting, and you can press
Press + to enter the system setting menu showed in figure 5,
or to enter the sub-menu.
Settings Sub-menu:
System language
You can also set Simplified Chinese, French, Germany
and Russian language;
Take OK is set to ON by
quickly call out a data group, there will be a prompt
to let you confirm, if you set OFF for this option, the
settings will be edited directly when call out a data group;
Take Out is set to OFF by
previous output status, when set it ON, it will output directly when call out a data
group.
Boot Power is set to OFF by
when set it on, it will automatically turn on the output after booting.
Boot Logo is set to ON by
logo first, then enter the main interface, when set it OFF, it will enter the main
interface directly.
Buzzer is set to ON by
beep when press the button. When set it OFF, it will show
when press the button.
Backlight is set to level 4 by default, it can be set between level 0-5.
Update Rate is set to Low by default, you can set it low/mid/high, it is the fresh
rate of the real output voltage and current.
Max Power is set to 1440W by default, you can set it between 0-1440W, it is the
max output power. On the top you can see the *1 icon, it is the adjustment
magnification, you can press
you can set the value quickly, The max output is default voltage priority mode, when
the setting voltage*setting current is higher than the max power, the device will
automatically
or to enter the sub-menu, the option in blue
button to select menu.
is is set to English by
default, when you
default, when call out a data group, it will keep the
default, when boot the device the output is cut off,
default, when boot the device, it will show the boot
default,it will show
or to choose the different
50
default.
figure 5
on the top, and you can hear the
, there will not be beep
magnification so that
press