Huawei SUN2000 Series User Manual page 111

SUN2000-(196KTL-H3, 200KTL-H3, 215KTL-H3)
Seires
User Manual
N
o.
3
4
Issue 03 (2021-09-30)
Parameter Description
Startup current When the current of a PV string reaches
for 2 in 1 Startup current for 2 in 1 detection, the
detection PV string is automatically identified as 2 in
1.
You are advised to use the default value.
NOTE
PV string N Set this parameter based on the type of the
access type PV string connected to DC input terminal
of the inverter. Currently, the options are as
NOTE
follows: Automatic identification (default
N is the DC input
value), Disconnection, Single PV string,
terminal number
of the inverter.
and 2 in 1.
You are advised to retain the default value.
If the value is incorrectly set, the PV string
access type may be incorrectly identified
and alarms may be generated by mistake
for the PV string connection status.
Copyright © Huawei Technologies Co., Ltd.
The SUN2000-196KTL-H3, SUN2000-200KTL-H3,
and SUN2000-215KTL-H3 inverters do not
support Y-branch connectors. The 2-in-1 string
detection function is unavailable.
A String Access Detection
Remarks
N
104