Auto Standby; Apply Factory Settings - Philips 5000 Series User Manual

3
Use the remote control to control
play.
•
Press
resume play.
•
Press /
previous or next track.
•
During USB play, press USB to
toggle: repeat all tracks in one
folder and repeat off.
•
When repeat mode is turned
on, ALL RPT scrolls once on
the display panel.
• When repeat mode is turned
off, OFF RPT scrolls once on
the display panel.
Note
•
If a USB storage device has a large media
library, it takes some time to load those
contents.
•
This product may not be compatible with
certain types of USB storage device.
•
If you use a USB extension cable, USB
HUB, or USB multi-reader, the USB storage
device may not be recognized.
•
Digital camera PTP and MTP protocols are
not supported.
•
Do not remove the USB storage device
while it is being read.
•
Support a USB port: 5V

Auto standby

When playing media from a connected
device, this product automatically
switches to standby after 15 minutes of
button inactivity and no audio/video
play from a connected device.
EN
14
to start, pause or
to skip to the
500mA.

Apply factory settings

You can reset this product to the default
settings programmed at the factory.
1
In AUX mode, on the remote control
press Volume -, BASS -, and
TREBLE - in sequence within three
seconds.
» When the factory settings
restore is complete, the product
automatically switches off and
restarts.