2
Press DELAY again to select a
speaker for distance adjustment.
3
Press Volume +/- to adjust distance
for the selected speaker.
•
To exit setup mode without
save, press EXIT SETTINGS, or
3 seconds of button inactivity
occurs.
4
Repeat step 2 and 3 to set up the
distance for other speakers.
5
After the setup is complete, press
EXIT SETTINGS to exit.
» The value is saved and applied.
Set up speaker volume
Set up the speaker volume for optimal
surround sound.
1
Press VOL to enter setup mode.
» The display panel scrolls SPKR
VOL (speaker volume).
•
To exit setup mode, press EXIT
SETTINGS, or 3 seconds of
button inactivity occurs.
2
Press VOL again to play test tone
from the speakers.
3
Then press VOL to select a speaker
for volume adjustment.
4
Press Volume +/- to adjust volume
for the selected speaker.
•
To exit setup mode without
save, press EXIT SETTINGS, or
3 seconds of button inactivity
occurs.
5
Repeat step 3 and 4 to set up the
volume for other speakers.
6
After the setup is complete, press
EXIT SETTINGS to exit.
» The value is saved and applied.
4 Use your
product
This section helps you use this product
to play audio from connected devices.
Before you start
•
Make the necessary connections
described in the quick start guide
and the user manual.
•
Switch this product to the correct
source for other devices.
Adjust the volume
1
Press Volume +/- to increase or
decrease a volume level.
•
To mute sound, press
•
To restore the sound, press
again or press Volume +/-.
Choose your sound
This section helps you choose the ideal
sound for your video or music.
Sound mode
Select predefined sound modes to suit
your video or music.
1
Press SOUND to select a sound
option from the display panel.
•
AUTO: Automatically select a
sound setting based on the
sound stream.
•
M-CH: Create multi-channel
surround listening experience.
Ideal for watching movie.
•
PARTY: Create enhanced stereo.
Ideal for party music.
•
STEREO: Create two-channel
stereo. Ideal for listening to music.
.
EN
11