Table of Contents
Advertisement
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•
If you want to connect your SoundBar with another
Bluetooth device, disable the currently connected
Bluetooth device.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
•
no source button is pressed for 30
minutes, and
•
no audio/video playback is detected from a
connected device.
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
1
In AUX mode, press and hold NIGHT
MODE OFF for 5 seconds.
» When the factory settings restore is
complete, the SoundBar automatically
switches off and restarts.
5 Wall mount
your SoundBar
Before you mount your SoundBar on the wall,
read all safety precautions.
(see 'Safety' on page 2)
Wall mount
Note
•
You must detach the surround speakers from the main
unit before wall mounting or un-mounting.
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Secure the wall mount to a wall that can support the
combined weight of the product and the wall mount.
•
Before wall mount, you need not remove the four
rubber feet at the bottom of the soundbar, otherwise
the rubber feet cannot be fixed back.
Screw length/diameter
Depend on the type of wall mounting this wall
mount bracket, make sure that you use screws
of a suitable length and diameter.
> 25mm
For information about how to wall your
SoundBar, see the wall mount guide.
3 - 3.5mm
EN
13
Advertisement
Table of Contents
