Using your LED projector for the first
time
Navigation
buttons
Refer to the following steps when using your LED projector for the
first time.
NOTE: Ensure that your LED projector is connected to the power
adapter before turning it on for the first time. We strongly recommend
that you use a grounded wall socket while using your LED projector
on power adapter mode.
1.
Set up your LED projector then press and hold the power button
for three (3) seconds to turn it on.
2.
Press
or
browse through the available language options.
34
Select button
on your LED projector's control panel to
LED projector E-Manual