IMPORTANT!
•
Use only the bundled power adapter to charge the battery pack
and supply power to your LED projector.
•
Ensure that your LED projector is connected to the power adapter
before turning it on for the first time. Always plug the power cord
into a wall socket without using any extension cords. For your
safety, connect this device to a properly grounded electrical outlet
only.
•
The socket outlet must be easily accessible and near your LED
projector.
•
To disconnect your LED projector from its main power supply,
unplug your LED projector from the power socket.
WARNING!
Read the following precautions for your LED projector's battery:
•
The battery capacity will vary depending on the environment
temperature, humidity, and LED Projector usage.
•
The battery used in this device may present a risk of fire or
chemical burn if removed or disassembled.
•
Follow the warning labels for your personal safety.
•
Risk of explosion if battery is replaced by an incorrect type.
•
DO NOT dispose of in fire.
•
Never attempt to short-circuit your LED projector's battery.
•
Never attempt to disassemble and reassemble the battery.
•
Discontinue usage if leakage is found.
•
The battery and its components must be recycled or disposed of
properly.
•
Keep the battery and other small components away from children.
•
Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion;
•
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of
flammable liquid or gas;
•
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of flammable liquid or gas.
LED projector E-Manual
25