Press the Input button and change the input source to HDMI.
2.
3.
Press
repeatedly until the LED projector flashes a steady
white light.
Emergency light mode
The LED projector flashes a blinking white light when you use this
feature.
To use your LED projector as an emergency light:
1.
Disconnect all peripherals and the Wi-Fi dongle from your LED
projector then press the power button to turn it on.
Press the Input button and change the input source to HDMI.
2.
3.
Press
repeatedly until the LED projector flashes a blinking
white light.
16
Back/Splendid
button
LED projector E-Manual